ESU
-
ESU - H0 / 1:87 - Locomotives + Coaches - not in stock but can be ordered
Diesel locomotive class 215 117, DB, sound, DC +AC, H0-gauge
Diesel locomotive, class216, V160 130 DB, old red, era III, prototype condition around 1967, Sound + Rauch, DC / AC, H0 gauge
Model details:
- Newly designed frame and housing
- Structure and frame made of metal
- Openwork ventilation grilles in the roof, etched play grids
- Multi-part bogie panels with real steel springs
- Separately attached grab bars and steps
- Spring loaded buffers
- Coupling in a link-guided NEM shaft
- Five-pole ESU motor with two flywheels
- Drive via cardan / worm gear on three axes, two traction tires
- LokSound 5 decoder for DCC, Motorola®, M4 and Selectrix operation
- Independent registration at control centers with RailComPlus® or mfx functionality
- PowerPack storage capacitor for uninterruptible power supply
- Loudspeaker with large sound capsule for maximum sound enjoyment
- Universal electronics with plug-in slider and slide switch for switching between two-wire and middle-wire operation
- Smoke generator synchronized with the locomotive sound
- Digitized original sounds of a 216
- Sensor-controlled cornering noises when cornering slowly
- Light change depending on the direction of travel, headlights on the train side can be switched off, maneuvering, driver´s cab and driver´s desk lighting
- Brake sparks when braking sharply
- Pipette for filling the smoke generator and a second coupling are included
- Minimum drivable radius = 360 mm
- Length over the buffers = 184 mm
Prototype: The DB diesel locomotive type program of the 1950s had a gap between the 1,100 hp V100 and the twin-engine V200, which the Federal Railroad filled with the single-engine V160 from 1960. In order to achieve the desired maximum axle load of only 18.5 t, consistent lightweight construction was necessary. Nine of the ten pre-series machines, affectionately known as Lollo because of the conspicuous rounding of the front sides after the Italian film actress Gina Lollobrigida, were handed over to the DB in August 1960. The tenth received an angular forehead that was inexpensive to manufacture, but by keeping the frame it made for a less than attractive appearance. The V160s, which were built in series from 1964, then had a continuous frame and have shaped the image of DB mainline diesel locomotives ever since. The Daimler-Benz type MB 839 Bb (later MTU MB16 V 652 TB) was chosen as the drive motor. The 1900 hp sixteen-cylinder unit had a turbocharger and charge air cooling and accelerated the V160 to 120 km / h. Since the Federal Railroad did not see the necessity of equipping all V160s with multiple traction and push-pull train control, these facilities were only installed in V160 026-035, 083-104, 130-169 and 185-199. You can safely send your ESU models over the system by push-pull train. The V160s proved to be very reliable right from the start and were used before freight, passenger and even express trains. The four-axle vehicles were also expected to transport passenger trains, for which the more powerful and faster V200 was intended. In freight transport, for example, the locomotives had to prove themselves as replacements for failed steam 44s. When in 1977 the last of the heavy five-couplers left the DB and new 218s were delivered at the same time, the stock of the 216 in the Ruhr area was increased and the locomotives were increasingly used in freight traffic.
Model details:
- Newly designed frame and housing
- Structure and frame made of metal
- Openwork ventilation grilles in the roof, etched play grids
- Multi-part bogie panels with real steel springs
- Separately attached grab bars and steps
- Spring loaded buffers
- Coupling in a link-guided NEM shaft
- Five-pole ESU motor with two flywheels
- Drive via cardan / worm gear on three axes, two traction tires
- LokSound 5 decoder for DCC, Motorola®, M4 and Selectrix operation
- Independent registration at control centers with RailComPlus® or mfx functionality
- PowerPack storage capacitor for uninterruptible power supply
- Loudspeaker with large sound capsule for maximum sound enjoyment
- Universal electronics with plug-in slider and slide switch for switching between two-wire and middle-wire operation
- Smoke generator synchronized with the locomotive sound
- Digitized original sounds of a 216
- Sensor-controlled cornering noises when cornering slowly
- Light change depending on the direction of travel, headlights on the train side can be switched off, maneuvering, driver´s cab and driver´s desk lighting
- Brake sparks when braking sharply
- Pipette for filling the smoke generator and a second coupling are included
- Minimum drivable radius = 360 mm
- Length over the buffers = 184 mm
Prototype: The DB diesel locomotive type program of the 1950s had a gap between the 1,100 hp V100 and the twin-engine V200, which the Federal Railroad filled with the single-engine V160 from 1960. In order to achieve the desired maximum axle load of only 18.5 t, consistent lightweight construction was necessary. Nine of the ten pre-series machines, affectionately known as Lollo because of the conspicuous rounding of the front sides after the Italian film actress Gina Lollobrigida, were handed over to the DB in August 1960. The tenth received an angular forehead that was inexpensive to manufacture, but by keeping the frame it made for a less than attractive appearance. The V160s, which were built in series from 1964, then had a continuous frame and have shaped the image of DB mainline diesel locomotives ever since. The Daimler-Benz type MB 839 Bb (later MTU MB16 V 652 TB) was chosen as the drive motor. The 1900 hp sixteen-cylinder unit had a turbocharger and charge air cooling and accelerated the V160 to 120 km / h. Since the Federal Railroad did not see the necessity of equipping all V160s with multiple traction and push-pull train control, these facilities were only installed in V160 026-035, 083-104, 130-169 and 185-199. You can safely send your ESU models over the system by push-pull train. The V160s proved to be very reliable right from the start and were used before freight, passenger and even express trains. The four-axle vehicles were also expected to transport passenger trains, for which the more powerful and faster V200 was intended. In freight transport, for example, the locomotives had to prove themselves as replacements for failed steam 44s. When in 1977 the last of the heavy five-couplers left the DB and new 218s were delivered at the same time, the stock of the 216 in the Ruhr area was increased and the locomotives were increasingly used in freight traffic.
€479,00
incl. Vat
* Recommended Retail Price
€444,90
incl. Vat
You save
7,12
%
(=
€34,10
)
Item not in stock - can be ordered
Safety notice:
Recommended for modelers and collectors 15 years and older. Due to scale and prototypical
Due to scale and prototypical production, tips, edges and small parts are present.
Danger of swallowing. Not in the hands of children under 15 years!
