Blog

2024-04-28

MF Train 33301 - Offer of the Week - N Set of 2 car transport trolleys blue EETC

N-gauge, set of 2 car transport wagons DDm 916 blue of the EETC, Era VI Model: - Coupler with NEM standard shaft - Minimum radius R2 Prototype: In 1971/1972, the German State Railroad put 37 DDm type car transport cars for passenger trains from the French company ANF into service. After reunification, the cars were transferred to the Deutsche Bahn AG fleet where they were operated as DDm 916. They were used in the motorail trains together with the DDm 915. Many cars were later sold abroad or to private companies. In addition to the German variants, there are also French, Spanish, Dutch and Czech variants. -> EAN 4250528620679 This offer is valid until Friday the 03.05.2024 12:00, or while our stock lasts. With best regards from Team Modellbahn Kramm GmbH

2024-04-27

Fleischmann 796885 - Offer of the Week - N digital electric locomotive rail grinding locomotive

N-gauge digital, electric locomotive, rail grinding locomotive, Era III-V - The model is equipped with a permanently soldered digital decoder at the factory - The locomotive has motor-driven, rotating cleaning disks - This keeps the rails clean without liquid - Replacement grinding wheels 00357969 -> EAN 4005575254786 This offer is valid until Friday the 03.05.2024 12:00, or while our stock lasts. With best regards from Team Modellbahn Kramm GmbH

2024-04-26

Vollmer 47688 - Offer of the Week - N-gauge, bakery with garden café, interior fittings and LED

N-gauge, bakery with garden café, interior fittings and LED lighting, functional kit This romantic half-timbered house is home to a bakery with a café. The enclosed lighting puts the sales room in the right light. When the weather is nice, the spacious terrace café is very popular. - Dimensions: L 14.2 x W 11.5 x H 12 cm -> EAN 4026602476889 This offer is valid until Friday the 03.05.2024 12:00, or while our stock lasts. With best regards from Team Modellbahn Kramm GmbH

2024-04-26

Faller 130590 - H0-gauge, filling station 50s

Small filling station with flat roof based on original models in Friedrichshafen and Tettnang. The layout and window strip of the cashier's area as well as the wide, slender cantilevered plate, which covers the filling station island with two fuel pumps, are rounded off in the classic design of the 1950s. The signal red advertising lettering and an all-round contrasting stripe accentuate the white plaster façade. This kit contains: 93 individual parts in 7 colors, window film, 1 curtain mask, 1 decoration and 1 construction instruction. -Dimensions 141 x 97 x 53 mm -> EAN 4104090305901 With best regards from Team Modellbahn Kramm GmbH

2024-04-26

Roco 67127 - H0 Set of 8 Freight Cars, Era 3 of the DR

H0-gauge, car set with eight different freight cars for the German State Railroad, Era III. The set consists of a boxcar with a barrel roof, a boxcar with a flat roof, a refrigerator car, three open boxcars, a stake car, and a folding lid car. All of the models are finely detailed and printed to match the era Inexpensive, complete freight train -> EAN 900503367127 With best regards from Team Modellbahn Kramm GmbH

2024-04-26

Faller 161479 - H0-gauge Car System, Mercedes-Benz O405 bus starter set incl

H0-gauge Car System, Mercedes-Benz O405 bus starter set incl. decos Package contents: - Mercedes-Benz O 405 bus (WIKING) - Decos - Battery charger - 10 m special contact wire - Road filler - Road paint - Road markings - crash barriers - Boundary posts - Detailed instructions -> EAN 4104090614799 With best regards from Team Modellbahn Kramm GmbH

2024-04-19

Trix 14939 - N turnout right 15 degrees

N-gauge, manual turnout right, 15°, with polarized frog, can be retrofitted with electric drive 14935 for electric turnout -> EAN 4028106149399 With best regards from Team Modellbahn Kramm GmbH

2024-04-19

Trix 15538 - N Gauge, Car Set, Pressurized Gas Tank Cars, Era IV-V

Model: All of the cars have detailed underframes and openwork frames. The exterior side rails have a U-shaped section that is open to the outside. The bogies are of the Minden-Dorstfeld design. Models with and without sun canopies. Attached brakeman's platforms. With kinematics for close couplers. Overall length over buffers 320 mm. - One-time series - Prototype: 4 four-axle pressurized gas tank cars of different types with and without sun canopies. Privately owned cars for the companies Eva Eisenbahn-Verkehrsmittel AG, Düsseldorf and WACKER Chemie. All of the cars are used on the German Federal Railroad (DB). Operating condition around 1988. -> EAN 4028106155383 With best regards from Team Modellbahn Kramm GmbH

2024-04-19

Faller 232386 - N 2 townhouses Beethovenstrasse

Renovated terraced houses with bakery and small gallery on the ground floor. There are two small dormer windows in the attic. The two terraced houses are an ideal addition to the "Beethovenstrasse" town row, item 232385 and can also be built in halves. This kit contains: 434 individual parts in 9 colors, window parts, 2 curtain masks, 2 decorations and 2 building instructions. - Dimensions terraced house 1: 65 x 58 x 118 mm - Dimensions of terraced house 2: 65 x 58 x 118 mm - Overall dimensions: 130 x 58 x 118 mm -> EAN 4104090323868 With best regards from Team Modellbahn Kramm GmbH

2024-04-12

Viessmann 4119 - H0 Concrete mast for new lines

H0-gauge, concrete mast for new lines, with boom, filigree metal design. Central projection: 4 cm, height: 9.85 cm -> EAN 4026602041193 With best regards from Team Modellbahn Kramm GmbH

2024-04-12

Rivarossi 4371 - H0 DC set of 4 DR double-decker units

H0 DC set of 4 DR double-decker units H0-gauge DC, set of 4 double-decker unit without control compartment in blue/light gray DR livery, Era IV -> EAN 5063129018412 With best regards from Team Modellbahn Kramm GmbH

2024-04-12

Faller 130701 - H0-gauge, row of town houses Beethovenstraße.

H0-gauge, row of town houses on Beethovenstraße Lively town scene! The row of 4 buildings with 2 corner houses and 2 terraced houses offers many possible variations and combinations. Stores and business premises are located on the first floor of each building. The upper floors house typical old town residential units. The two terraced houses can also be built in half. This kit contains: 1068 individual parts in 16 colors, window parts, 4 curtain masks, 4 decorations and 4 building instructions. -> EAN 4104090307011 With best regards from Team Modellbahn Kramm GmbH

2024-03-24

Trix 14938 - N turnout left 15 degrees

N-gauge, manual turnout left, 15°, with polarized frog, can be retrofitted with electric drive 14934 for electric turnout -> EAN 4028106149382 With best regards from Team Modellbahn Kramm GmbH

2024-03-23

Fleischmann 831514 - N-gauge, 2-part set: Covered freight cars, DB, Era IV

Car set with two boxcars, class Gbs 252, of the German Federal Railroad. - Version without blasting gear - Both cars with different car numbers -> EAN 4005575255820 With best regards from Team Modellbahn Kramm GmbH

2024-03-22

Faller 222413 - N-gauge, Trumpf airship - aerial advertising for confectionery -

Airship with gray gondola, gray hull and the lettering of the chocolate brand "Trumpf". The kit is also suitable as a background model for the nominal size H0. This kit contains: 25 individual parts in 2 colors, window film, 1 decoration and 1 construction instruction. - Dimensions: 360 x 93 x 115 mm -> EAN 4026602411033 With best regards from Team Modellbahn Kramm GmbH

2024-03-17

Viessmann 4109 - H0 track mast, 10 pieces

H0 track mast, 10 pieces, with bracket, filigree metal design. Medium projection: 3.4 cm, height: 9.9 cm -> EAN 4026602411033 With best regards from Team Modellbahn Kramm GmbH

2024-03-16

Hobbytrain 43034 - H0 DB Ep3 3-part car set

H0-gauge, 3-part set: 1x BC4ümg, 2x C4ümg, Era III, of the DB Model characteristics: - Detailed design - Consideration of all design differences - Numerous applied details - Extensive printing - Prepared for interior lighting We are adding the D83/84 from the 1956 winter timetable of the German Federal Railroad to the series of express trains. This consists of the five-car Munich-Hamburg main train and the three-car Stuttgart-Würzburg-Hamburg wing train. At that time, new m-cars were to be found scattered in trains throughout Germany, block trains consisting of m-cars were rather rare. -> EAN 4250528617716 With best regards from Team Modellbahn Kramm GmbH

2024-03-15

Faller 110130 - H0-gauge, Horrem station

True-to-original model based on the "Green Station" in Kerpen-Horrem in North Rhine-Westphalia on the regional express route between Cologne and Aachen. DB Station&Service AG's flagship project is the first station to be built with environmental, energy and climate aspects in mind. While the clear structure and restrained color scheme of the slate building allows the trains to make a grand entrance, large glazed façade and roof surfaces ensure transparency and optimal daylight for passengers in the central, column-free hall with waiting area. Photovoltaics for the use of solar energy and the greening of the cantilevered roof surfaces of varying lengths round off this ecological model for success. Seating elements, modern lanterns and train indicators are included in the kit. This kit contains: 364 individual parts in 9 colors, window parts, 1 curtain mask, 1 decoration and 1 construction instruction. Laser-cut base plate. Dimensions: 448 x 195 x 110 mm -> EAN 4104090101305 With best regards from Team Modellbahn Kramm GmbH

2024-03-10

Fleischmann 826213 - N 2-part set, boxcars, Era V, DB AG

N-gauge, wagon set with two covered freight wagons, class Gbs 258, of the Deutsche Bahn (DB AG), Era V New construction 2021! - Finely detailed models with separately applied plug-in parts - With movable sliding doors - Version with reinforced side doors -> EAN 4005575253826 With best regards from Team Modellbahn Kramm GmbH

2024-03-09

Saxonia 180010 - N Three-piece refrigerated car set "Seefische", DRG, aged

N-gauge, three-piece refrigerated car set "Seefische", used by the Deutsche Reichsbahn-Gesellschaft, Era II, aged This special series was produced by Saxionia exclusively for Modellbahn Kramm. - Elaborately aged, operationally soiled, each model is unique. - Basic model from Fleischmann 881810 - the cars are aged differently -> EAN 2000075442130 With best regards from Team Modellbahn Kramm GmbH

2024-03-08

Faller 222410 - N Goodyear airship

N-gauge, Goodyear airship - Good luck! Model of a "GZ-20a" blimp from the legendary Goodyear fleet with a grey gondola and a grey hull with "Goodyear" lettering and blue stabilizing fins. This kit contains: 25 individual parts in 2 colors, window film, 1 decoration and 1 construction instruction. - Dimensions: 360 x 93 x 115 mm -> EAN 4104090224103 With best regards from Team Modellbahn Kramm GmbH

2024-03-03

Revell 03500 - 1:9 scale Kübelwagen Type 82 Platinum Edition kit

1:9 scale Kübelwagen Type 82 Platinum Edition kit The Type 82, better known as the Kübelwagen, was the Wehrmacht's all-terrain vehicle par excellence. Kübelwagens were used on all battlefields and were able to cope with all climatic conditions due to their robustness. The large scale of 1:9 already allows a very high level of detailing of the Kübelwagen, which can be increased even further with the photo-etched parts included in the kit. Photo-etched parts Functional suspension Opening hood Very detailed engine Fabric hood Steerable front axle Rubber tires Model length: 42 cm Limited edition EAN: 4009803035000 With best regards from Team Modellbahn Kramm GmbH

2024-03-02

Märklin 39244 - Series 13 EST express steam locomotive

H0-gauge digital with sound, class 13 EST express steam locomotive Model: The locomotive has an mfx+ digital decoder and extensive light and sound functions. Regulated high-efficiency propulsion with a flywheel in the boiler. 4 axles powered. Traction tires. The locomotive and tender are constructed mostly of metal. Smoke unit from 72270 is installed as standard. The dual headlights on the locomotive and tender change over with the direction of travel and the built-in smoke unit will work in conventional operation and can be controlled digitally. Additional cab lighting can be controlled digitally. Maintenance-free warm white LEDs are used for the lighting. Adjustable coupler with kinematics between the locomotive and tender. The tender has a close coupler with NEM shaft. Minimum passable radius 437.5 mm. Brake hoses, heating couplers, and imitation screw couplers are included. A frame without a wheel recess for the trailing axle is also included, which can be exchanged for the standard frame of the trailing axle for the display case, for example. Length over buffers 30.4 cm. Prototype: French Eastern Railroad (EST) class 13 (241-A) heavy express steam locomotive with a tender. Black basic paint scheme with black running gear. Version as a locomotive for the EDELWEISS express train car set. Type-specific modification of the wind deflectors. 2-light headlights with kerosene lamps, with one lamp at the top and one lamp at the bottom. Locomotive road number EST 241-004. Operating condition around 1931. The EDELWEISS express train car set to go with this car set, with newly constructed passenger cars, can be found in the Märklin H0 assortment under item number 42470. EAN: 4001883392448 With best regards from Team Modellbahn Kramm GmbH

2024-03-01

Faller 130303 - H0-gauge, detached house under construction

H0-gauge, detached house under construction The outer and inner walls are built with gray hollow bricks. The roof truss has already been erected. This building kit contains: 57 individual parts in 3 colors and 1 building instruction. EAN: 4104090003036 With best regards from Team Modellbahn Kramm GmbH

2024-02-25

Revell 05599 - Titanic + 3D Iceberg

1:600 RMS Titanic kit + 3D puzzle (iceberg) Iceberg ahead! Unfortunately, this warning came too late for the Titanic, which sank into the icy waters of the Atlantic after the collision. The scene of the momentous collision can be recreated with this set consisting of the easy-click kit of the RMS Titanic and a Revell 3D puzzle diorama with iceberg. In addition to the easy-click kit of the Titanic and the 3D puzzle diorama, 6 basic colors and a brush are included. - easy-click kit of the RMS Titanic - Original Revell 3D puzzle diorama - 6 base colors - paintbrush Crafting fun with great results for everyone aged 10 and over. The innovative easy-click system guarantees quick success: Multi-colored, precisely manufactured components are stably connected by simply plugging them together and decorated with stickers. Painting is not necessary! Optionally, the model can also be painted and thus becomes a very personal and unique piece. A recommendation with up to 5 colors is included in the assembly instructions. -> EAN 4009803055992 With best regards from Team Modellbahn Kramm GmbH

2024-02-24

Hobbytrain 24833 - N 2er Set Leichtbau-Kesselwagen Aral DB

N-gauge, set of 2 DB Aral lightweight tank cars, Era IV Model: - New construction - Consideration of all design differences - With and without brakeman's cab - Attached etched parts - Kinematics with NEM coupler pocket Prototype: From 1941, the Uerdingen wagon factory, together with several other companies such as MAN, built over 3700 lightweight tank wagons. The two-axle cars had a capacity of 30m3. In the course of the Second World War, the wagons were used by almost all European railroad administrations and, as in Germany, some were still in use until the early 2000s. -> EAN 4250528620358 With best regards from Team Modellbahn Kramm GmbH

2024-02-23

Faller 222113 - N-gauge locomotive shed set

N-gauge, railway engine shed set FALLER highlight redesigned. Three-stall engine shed in half-timbered style with water tower at the rear. Suitable for locomotives up to 162 mm gauge. - Gate height: 36 mm - Track center distance: 37 mm Two lifting jacks, a pipe blowing frame, a water crane and a loading gauge are included in the set for further design. This kit contains: 265 individual parts in 8 colors, window film and 1 construction instruction. -> EAN 4104090221133 With best regards from Team Modellbahn Kramm GmbH

2024-02-18

Carrera 30941 - CARRERA DIGITAL 132 - Dodge Charger Daytona No.42

Race around the track with the muscle car! The Dodge Charger Daytona was the successor to the Dodge Charger 500 and was only produced in 1969 due to moderate sales figures. The muscle car became famous partly because of the famous country singer Marty Robbins, who drove the eye-catching speedster with its pink body and yellow roof in numerous NASCAR races. The 1:32 scale model not only looks extremely cool, the Dodge Charger Daytona "No.42" is also perfect for the famous tracks. If you like bright colors, you are sure to be the envy of the competition. -> EAN 4007486309418 With best regards from Team Modellbahn Kramm GmbH

2024-02-16

Faller 140335 - H0 Carousel Coffee Cups Heather Roses

H0-gauge, Carousel coffee cups Heiderosen Only for those with a head for heights. Functional model of a coffee cup carousel based on an original model in the former Heide Village of the Heide Park Resort in Soltau. Passengers take a seat on a huge tray in oversized coffee cups that rotate around a central coffee pot. A motor is included in the kit. This kit contains: 138 individual parts in 3 colors, window film, 1 drive motor and 1 construction instruction. - Dimensions: Ø 172 x 135 mm Model of a fairground wagon, which belongs on every fairground and should not be missing on any fairground layout. -> EAN 4104090403355 With best regards from Team Modellbahn Kramm GmbH

2024-02-10

Hobbytrain 24851 - Set of 2 lightweight tank car

Set of 2 PKP Petrochemia lightweight tank wagons, Era IV/V, N-gauge Model characteristics: - New design - All design differences taken into account - With and without brakeman's cab - Attached etched parts - Kinematics with NEM coupler pocket From 1941, Waggonfabrik Uerdingen, together with several other companies such as MAN, built over 3700 lightweight tank wagons. The two-axle wagons had a capacity of 30m3. In the course of the Second World War, the wagons came to almost all European railroad administrations and, as in Germany, some were still in use until the early 2000s. -> EAN 4250528617280 With best regards from Team Modellbahn Kramm GmbH

2024-02-09

Faller 231713 - N Sawmill

N-gauge, sawmill - Building dimensions: 230 x 130 x 92 mm - Dimensions gantry crane: 86 x 40 x 72 mm -> EAN 4104090317133 With best regards from Team Modellbahn Kramm GmbH

2024-02-04

Revell 05666 - 1:24 gift set 35 years VW Corrado

Model kit of the VW Corrado in 1:24 scale is the perfect gift for any VW fan or model builder. With new parts and improved detailing, this kit is sure to impress. The VW Corrado was launched in 1988 and only 97535 examples were produced. Now you can own your own piece of history with this detailed model kit. With 80 parts, this advanced level 4 model kit is perfect for experienced modelers aged 12 and up. - Multi-part body - Structured interior - Multi-part engine - Glue, paints and brushes included Scope of delivery: Plastic model kit (not assembled) Illustrated, multilingual assembly instructions Decals Poster Base paints (Revell Aqua Color) Adhesive (Revell Contacta Professional Mini) Brushes -> EAN 4009803056661 With best regards from Team Modellbahn Kramm GmbH

2024-02-02

Faller 130160 - H0 Modern fire station

H0 Modern fire station H0-gauge, Modern fire station Fire and flame! Signal red fire station based on an original model in Oberndorf am Neckar, consisting of a two-storey head building with administration and social rooms as well as an adjoining hall building with four boxes for fire engines and for use as a workshop or washing hall. Striking administrative wing: in the horizontal rectangular building with a covered terrace and modern ribbon windows, the glazed corner of the building with folded concrete stairs at the entrance to the control center creates a lively interplay of light and shadow. Transparent vehicle hall: at the second flat-roofed building, where the heavy fire engines enter and leave every day, generous daylight enters the halls through glazed folding doors. Door openings to the front and rear allow the use of FALLER Car System. Alerted due to lack of space? The matching vehicle hall, item 130161, offers much more space for your emergency vehicles. This kit contains: 303 individual parts in 6 colors, window parts, 1 curtain mask, 1 decoration and 1 construction instruction. -Dimensions 208 x 135 x 76 mm, 261 x 135 x 64.5 mm -> EAN 4104090301606 With best regards from Team Modellbahn Kramm GmbH

2024-01-28

PocherHK119 - 1:8 scale Lamborghini Aventador kit

1:8 POCHER Lamborghini Aventador LP700-4 kit in Yellow The Lamborghini Aventador Yellow with pre-painted body. The predecessor of this kit was named Model of the Year in 2013 by the trade magazine Modell Fahrzeug. Lamborghini Aventador LP 700-4, twelve cylinders, 700 hp, 0 to 100 in 2.9 seconds and a top speed of 349 km/h. The original is a real fighter jet for the road. POCHER now presents this dream car in 1:8 scale as a high-quality kit with more than 790 parts. In keeping with the POCHER tradition, the body of the model, which weighs around 7 kg, is made entirely of metal and is already painted. Various parts can be moved and doors and hoods can be opened. Even right or left-hand drive is included. The accurately fitting kit has many screwed components and is easy to assemble with a little skill. Build your own Lamborghini! - Dimensions (mm): 595 x 287 x 144 - Color: Yellow metallic -> EAN 5063129020132 With best regards from Team Modellbahn Kramm

2024-01-27

Arnold 4409 - N set DDm car transport wagon 2-piece DR

N set DDm car transport wagon 2-piece DR N-gauge, 2-piece set DR DDm car transport wagon, in blue paintwork, Era IV -> EAN 5055286708527 With best regards from Team Modellbahn Kramm

2024-01-26

Faller 232386 - N 2 townhouses Beethovenstrasse

N-track, 2 townhouses Beethovenstrasse - redesigned! - Renovated terraced houses with bakery and small gallery on the ground floor. There are two small dormer windows in the attic. The two terraced houses are an ideal addition to the "Beethovenstrasse" town row, item 232385 and can also be built in halves. This kit contains: 434 individual parts in 9 colors, window parts, 2 curtain masks, 2 decorations and 2 building instructions. - Dimensions terraced house 1: 65 x 58 x 118 mm - Dimensions of terraced house 2: 65 x 58 x 118 mm - Overall dimensions: 130 x 58 x 118 mm -> EAN 4104090323868 With best regards from Team Modellbahn Kramm

2024-01-21

Faller 110130 - H0-gauge, Horrem station

True-to-original model based on the "Green Station" in Kerpen-Horrem in North Rhine-Westphalia on the regional express route between Cologne and Aachen. DB Station&Service AG's flagship project is the first station to be built with environmental, energy and climate aspects in mind. While the clear structure and restrained color scheme of the slate building allows the trains to make a grand entrance, large glazed façade and roof surfaces ensure transparency and optimal daylight for passengers in the central, column-free hall with waiting area. Photovoltaics for the use of solar energy and the greening of the cantilevered roof surfaces of varying lengths round off the ecological model for success. Seating elements, modern lanterns and train indicators are included in the kit. This kit contains: 364 individual parts in 9 colors, window parts, 1 curtain mask, 1 decoration and 1 construction instruction. Laser-cut base plate. Dimensions: 448 x 195 x 110 mm -> EAN 4104090101305 With best regards from Team Modellbahn Kramm

2024-01-20

A.C.M.E. 69542 - H0 Sound DBAG class 180 Ep-5 electric locomotive

H0-gauge DC digital with sound, Class 180 electric locomotive, Era 5 of the DBAG built by SKODA in service from 1994. Three headlights / two marker lights with color change (white/red) color change (white/red). NEM 362 coupler pocket. -> EAN 8020200695426 With best regards from Team Modellbahn Kramm

2024-01-19

Saxonia 200001 - H0 self-unloading wagon, DB Schenker, aged

H0-gauge, Deutsche Bahn AG self-unloading wagon, DB Schenker, aged, road number: 81 80 6633 025-4 This special series is manufactured by Saxionia exclusively for Modellbahn Kramm. - elaborately aged, including buffers and accessories such as steps and grab rails (these are already pre-assembled), the end window holders are included - each model is unique - Basic model from Roco 56339 - Ideal for block trains -> EAN 2000075512864 With best regards from Team Modellbahn Kramm

2024-01-14

Faller 222583 - N-gauge, arch bridge

N-gauge, arch bridge Arch bridge with 2 pre-flood bridges and pillars (like item 222548) 4 x 10 and 4 x 5 mm. The 3 parts of the bridge can also be used individually. 2-track construction is possible, 1 x item 222540 is also required. Brackets for overhead line masts are included. This kit contains: 40 individual parts in 3 colors and 1 construction instruction. - Dimensions: 400 x 32 x 84 mm -> EAN 4104090025830 With best regards from Team Modellbahn Kramm

2024-01-13

Lemke Collection 95004 - N Flixtrain Set-4 Set of 3 passenger coaches

N-gauge, Flixtrain Set-4, set of 3 passenger coaches Bimz 264, Ep.VI Set 4: 1st Heros Bimz, white-grey frame, white-grey window frames, complete Flixtrain livery - Bimz (56 80 22-91 248 D-HEROS) 2.Heros Bimz, white-grey frame, white-grey window frames, grey doors without Leo Express stickers, Flixtrain wrapping - Bimz 264.1 (D-HEROS 56 80 22-91 295-6) 3rd Heros Bimz, white-grey car with Flixtrain stickers and the inscription: When I grow up, I'll be green too - Bimz 264.4 (51 80 22-94 880-7 D-HEROS) Long-distance bus provider Flixbus is putting two more long-distance trains on the rails, doubling its service. From June 21, 2018, the Flixtrain will connect Stuttgart and Berlin up to twice a day. On the Cologne-Hamburg route, the second train will arrive on July 19, 2018. The green trains are currently the only competition in long-distance rail transport for the state-owned company, which counted 143 million passengers on its long-distance trains last year. Flixtrain has applied to operate between Berlin and Cologne and Berlin and Munich from mid-December. In cooperation with Arnold, Hobbytrain is realizing the latest and first Flixtrain train in N gauge. -> EAN 4250528615521 With best regards from Team Modellbahn Kramm

2024-01-12

Trix 18024 - IMA 2023 Märklin Days Beer Wagon Staufen Bräu

IMA 2023 Märklin Days Beer Wagon Staufen Bräu N-gauge, IMA 2023 Märklin Staufen Bräu Beer Car Days only available at the IMA 2023 in Göppingen -> EAN 4028106180248 With best regards from Team Modellbahn Kramm

2024-01-07

Faller 130945 - H0 Marienschacht winding system

H0-gauge, Marienschacht winding system The winding system, consisting of a shaft hall with winding frame and winding machine house, gives your layout a new visual highlight. A dumping device at the side of the shaft hall enables the simulation of rail loading. The FALLER motor (item 180629, not included) can be used to set the two large pulleys in the winding frame in motion. FALLER coal (art. 170723) is required for realistic decoration of the surroundings. This kit contains: 220 individual parts in 12 colors, window parts, 1 curtain mask, 1 decoration and 1 construction instruction. -> EAN 4104090009458 With best regards from Team Modellbahn Kramm

2024-01-06

ACME 52201 - H0 DB Era IV baggage car Dm 903 with folding doors express service

H0-gauge, DB express service Era IV baggage car Dm 903 with folding doors. The DB express freight car was also used together with other DB cars and DR cars in inter-zone trains, ACME design novelty. -> EAN 8020300522011 With best regards from Team Modellbahn Kramm

2024-01-05

Roco 71928 - H0 DC analog class 192 RTB VI electric locomotive

H0-gauge DC analog, RTB Cargo class 192 electric locomotive, Era VI - Prototypical conversion of the Smartron with new front plate and sliding steps - Used in freight traffic in Germany - Freestanding grab irons, partly made of metal - The headlights can be switched off completely or partially with a DIP switch - In cooperation with Railcolor Design RTB Cargo has had three Siemens Smartron locomotives in its fleet since April 2020. The locomotives leased from Northrail are mainly used for road logistics transport between Dingolfing and the North Sea ports. All Smartron locomotives are handed over to the owner in a standardized version for traffic in Germany only. Based on the Vectron platform, the Smartron offers customers a locomotive at attractive conditions. Visually, the Smartron differs from the Vectron locomotives in a modified front panel, sliding steps with Smartron lettering and side panels without cameras. Smartron and Vectron are registered trademarks of Siemens AG -> EAN 9005033719289 With best regards from Team Modellbahn Kramm

2023-12-24

Modellbahn - Kramm wishes Merry Christmas 2023!

unbelievable ... , the year 2023 (anniversary year 40 years Modellbahn-Kramm) is almost over and Christmas is just around the corner! We would like to take this opportunity to thank you for your loyalty. Next year we have a lot planned for you again: great events, exhibitions of model railroad club layouts, terrain construction landscape seminars, an in-house exhibition with our suppliers and wonderful trips for railroad enthusiasts. We wish you and your families a peaceful and peaceful Christmas. Our Christmas present to you "Free delivery": all orders that reach us from now until Tuesday 26.12.2023, 23:59 from our entire range, we deliver in Germany from 30,00 € order value postage free and abroad from 100,- € order value at half the postage price according to our shipping costs list*. * Applies only to new orders and deliverable goods, there are no backorders, returns and deposits are not possible with this promotion. With Christmas greetings from Hilden the team of Modellbahn-Kramm

2023-12-08

Faller 212113 N-gauge, Bonn railroad station

N-gauge, Bonn railroad station A building from the Wilhelminian era, in classicist style, with a world-famous name. For 100 years the center of many large railroad stations. Now, as a model, it is the representative center of the FALLER railroad station concept. The wonderful richness of form, partly taken over from the original model, the excellent reproduction of the many details through engravings in remarkable fineness and the variety of decorative parts make this kit a top model on every layout. With a length of approx. 500 mm, the Bonn station already has an impressive format. With the various models from the Bonn station concept, interesting station complexes can be built with the station concourse (item 222128) and the platforms (item 222119). Thanks to the combinability of the individual models, the possibilities range from a small suburban station to a stately terminus station. This kit contains: 552 individual parts in 9 colors, window parts, 8 curtain masks, 2 decorations and 1 construction instruction. - Dimensions: 504 x 127 x 110 mm -> EAN 4104090021139 With best regards from Team Modellbahn Kramm

2023-12-03

Faller 130703 - H0-gauge, 2 town houses Beethovenstraße

Completely renovated! The corner house and the terraced house in Beethovenstraße have been given a new coat of paint. Next to the telephone store is a restaurant serving regional cuisine. Student apartments are located on the upper floors. The terraced house can be built in half. This kit contains: 582 individual parts in 11 colors, window parts, 2 curtain masks, 2 decorations and 2 building instructions. -> EAN 4104090307035 With best regards from Team Modellbahn Kramm

2023-12-02

Märklin 37875 - H0 Sound electric locomotive Re 420, 175 Years of Swiss Railways

H0-gauge digital with sound, Re 420 electric locomotive, left and right with various markings, 175 Years of Swiss Railways SBBModel: The locomotive has an mfx+ digital decoder and extensive sound functions. Controlled high-efficiency propulsion with flywheel, centrally mounted. 4 axles powered by cardan shafts. Traction tires. Triple headlights that change over with the direction of travel and 1 white marker light (Swiss headlight changeover) in conventional operation, can be controlled digitally. The lighting can be switched to 1 red marker light for solo operation or 2 red marker lights for solo operation in Germany. The headlights at locomotive ends 2 and 1 can each be turned off separately in digital operation. If the headlights on both sides of the locomotive are turned off, the double A light will function as a red emergency stop signal on both sides. The main headlights, cab lighting, and engine room lighting can each be controlled separately in digital operation. Maintenance-free warm white and red LEDs are used for the lighting. Attached metal grab irons. The couplers can be exchanged for the front aprons included. Length over buffers 17.1 cm. Prototype: Swiss Federal Railways (SBB), SBB Cargo Division, Re 420 electric locomotive. Special livery for the 175th anniversary of Swiss Railways in 2022. Road number Re 420 251-1. 2022 operating condition. Special locomotive for 175 years of Swiss railroads The ceremonial rollout took place on 09.03.2022 in Yverdon-les-Bains/Switzerland.A major anniversary is coming up in Switzerland this year.175 years ago, on August 9, 1847, the first railroad ran between Zurich and Baden on the so-called Spanisch Brötli Bahn. It all started with the Spanisch Brötli - a delicious pastry from the Swiss spa town of Baden. That's not entirely true, of course, but on August 9, 1847, the first railroad built in Switzerland began operating from Zurich to Baden. Now the servants of Zurich's high society could comfortably collect the famous pastries that arrived by train early in the morning and bring them to the Sunday breakfast table on time, without having to walk for hours to Baden and back. As a result, the name Spanisch-Brötli-Bahn soon became established for this route. In the years that followed, a rail construction boom also broke out in Switzerland, reaching a route length of 2,457 km within 35 years. Finally, between 1902 and 1909, the nationalization of five major railroad companies gave rise to the Swiss Federal Railways (SBB). As a result, an increasingly dense rail network wove its way across Switzerland, which is still used extensively today. After all, the Swiss have one of the highest rates of rail use in the world, with the average person traveling around 1,800 km by train each year. To mark this memorable anniversary, SBB is presenting an electric locomotive with a correspondingly eye-catching special design. The Re 420 251 (ex Re 4/4 II 11251) was selected for this, whereby this universally deployable class was the mainstay of locomotive-hauled SBB traffic for decades and, with 276 units built between 1964 and 1985, also has the highest number of a class built for the Swiss railroads -> EAN 4001883378756 With best regards from Team Modellbahn Kramm

2023-12-01

Brawa 45922 - H0 DC Set 5-teilig Personenwagen YL, Epoche-4 der DB

H0-Spur DC, Set 45922 Personenwagen YL der DB, Epoche IV, in chromoxidgrün, Gleichstrom (DC) inklusive LED-Beleuchtung, Inhalt: - 1x H0 Personenwagen ABymb 411 der DB, DC Basic+, Epoche IV, Betriebs-Nr. 50 80 30-11 097-9 BD Hamburg / Hamburg Hbf (58016) - 1x H0 Personenwagen Bylb 421 der DB, DC Basic+, Epoche IV, Betriebs-Nr. 50 80 21-11 179-6 BD Hamburg / Hamburg Hbf (58017) - 1x H0 Personenwagen Bylb 421 der DB, DC Basic+, Epoche IV, Betriebs-Nr. 50 80 21-11 183-8 BD Hamburg / Hamburg Hbf (58018) - 1x H0 Steuerwagen BDymf 456 der DB, DC Analog Basic+, Epoche IV, Betriebs-Nr. 50 80 82-11 009-1 BD Hamburg / Hamburg Hbf (58019) Gratis dazu: - 1x H0 (DC) Güterwagen (47997) Gms30, Epoche III, im Wert von 40,90 € (UVP) -> EAN 4012278459226 With best regards from Team Modellbahn Kramm

2023-11-27

Hobbytrain 30155 N analog electric locomotive 1193 Vectron WLC Ep4

N-gauge analog, Rh 1193 Vectron electric locomotive of the WLC, Era VI, Model features: - Power consumption across all axles - NEM 662 interface (Next 18) - Alternating white/red headlights, can be switched off - Consideration of all design differences in detail - Clearance: 119 mm - recommended for Radius 2 The Siemens Vectron success story continues. With over 1000 units sold, the Vectron is definitely one of the most successful rail vehicles ever built. It can now be found all over Europe, and the European locomotive's routes are getting longer and longer. Slovakian and Swiss Vectron meet in the heart of the Ruhr area. ÖBB is expanding its route network to Holland and SBB Cargo International has designed the Hollandpiercer especially for traffic to Holland. New variants are added almost every day and the Vectron now also feels at home in Serbia and Bulgaria. The Vectron has even made its way to Scandinavia and is in service with DSB and Hectorrail. -> EAN 4250528617396 With best regards from Team Modellbahn Kramm

2023-11-27

Fleischamnn 852323 N large-capacity self-unloading wagon type Falns183, DB AG

N-gauge, German Railroad AG type Falns 183 self-unloading car, Era VI. - Model with coupler pocket according to NEM 355 and KK kinematics Between 1981 and 1992, the companies LHB, O&K, Talbot and WU Siegen delivered a total of 3,623 Falns 183 (from 1987: Falns 183). -> EAN 4005575113397 With best regards from Team Modellbahn Kramm

2023-11-27

Faller 232270 N-gauge, Martinstor Freiburg im Breisgau

N-gauge, Martinstor Freiburg im Breisgau - Dimensions: 81 x 57 x 270 mm The adjacent building can also be used separately from the tower in a row of town houses. In the passageway of this building, the entrance front of a modern fast food restaurant can be created from the building set parts. The clock face of the two clocks can be effectively illuminated from the tower. This kit contains: 157 individual parts in 3 colors, 1 curtain mask, 1 decoration and 1 construction instruction. Use FALLER plastic glue for building. -> EAN 4104090022709 With best regards from Team Modellbahn Kramm

2023-11-19

Revell 05666 - 1:24 gift set 35 years VW Corrado

Model kit of the VW Corrado in 1:24 scale is the perfect gift for any VW fan or model builder. With new parts and improved detailing, this kit is sure to impress. The VW Corrado was launched in 1988 and only 97535 examples were produced. Now you can own your own piece of history with this detailed model kit. With 80 parts, this advanced level 4 model kit is perfect for experienced modelers aged 12 and up. - Multi-part body - Structured interior - Multi-part engine - Glue, paints and brushes included Scope of delivery: Plastic model kit (not assembled) Illustrated, multilingual assembly instructions Decals Poster Base paints (Revell Aqua Color) Adhesive (Revell Contacta Professional Mini) Brushes -> EAN 4009803056661 With best regards from Team Modellbahn Kramm

2023-11-18

Roco 70677 - Re 460 electric locomotive, 175 years of Swiss Railways SBB

H0-gauge DC analog, electric locomotive Re 460 019, left and right with various illustrations, 175 years of Swiss Railways SBB. - With elaborate printing in the anniversary design - Both side walls with different designs - With extra attached windshield wipers - The rear light (1x white) or train rear signal (1x red) can be switched with a DIP switch SBB is celebrating 175 years of railroads in Switzerland. On August 9, 1847, scheduled passenger services began between Zurich and Baden on the Spanisch Brötli Railway. This marked the beginning of the development of the Swiss railroad network. This historic moment in Swiss railroad history will be celebrated with a fitting anniversary program. The Association of Public Transport, SBB, PostBus and the Alliance Swiss Pass have planned a variety of public events in five regions for the celebrations, as well as the official ceremony on August 9, 2022. Another highlight that draws attention to the anniversary year is the class Re 460 locomotive designed by ROCO in collaboration with SBB and artist Gudrun Geiblinger. The anniversary locomotive has been given two different side designs. On the one hand, the world-famous Spanisch Brötli Bahn is reminiscent of the first railroad in Switzerland and the historic Zurich main station exudes the charm of the early railroad era. The other locomotive side is completely modern: The Swiss ICN high-speed train can be seen leaving the Gotthard Base Tunnel, a masterpiece of the Swiss rail industry. -> EAN 9005033706777 With best regards from Team Modellbahn Kramm

2023-11-17

Faller 130701 - H0-gauge, row of town houses Beethovenstraße.

H0-gauge, row of town houses on Beethovenstraße Lively town scene! The row of 4 buildings with 2 corner houses and 2 terraced houses offers many possible variations and combinations. Stores and business premises are located on the first floor of each building. The upper floors house typical old town residential units. The two terraced houses can also be built in half. This kit contains: 1068 individual parts in 16 colors, window parts, 4 curtain masks, 4 decorations and 4 building instructions. -> EAN 4104090307011 With best regards from Team Modellbahn Kramm

2023-11-12

Carrera 30926 - CARRERA DIGITAL 132 - Ford Capri Zakspeed Turbo Lili Reisenbich

CARRERA DIGITAL 132 - Ford Capri Zakspeed Turbo Lili Reisenbichler, No.4 -> EAN 4007486309265 With best regards from Team Modellbahn Kramm

2023-11-11

Saxonia 180004 - N-gauge, set 2-piece tank car ARAL, era IV, aged.

This special series was manufactured by Saxionia exclusively for Modellbahn Kramm. - Elaborately aged, operationally dirty, each model is unique. - basic model from Fleischmann 841402 - the cars are differently aged -> EAN 2000075437853 With best regards from Team Modellbahn Kramm

2023-11-10

Faller 239001 - N-gauge, set station Mühlheim

Contents: - 1x Mühlheim station - 1x platform - 1x gated level crossing - Accessories Dimensions: - 135 x 78 x 60 mm - 581 x 36 x 37 mm - 143 x 98 x 42 mm Multi-part set consisting of a country station with attached goods shed, a platform as well as the matching gated level crossing with accessories for safe crossing of the tracks. This kit includes: 233 individual parts in 15 colors, 1 curtain mask, 2 decos and 3 building instructions. Use FALLER - plastic glue for tinkering. -> EAN 4104090390013 With best regards from Team Modellbahn Kramm

2023-10-22

Carrera 30929 - Carrera Digital 132 Porsche Kremer K3 Kremer Racing No.62

Champion of the DRM! The Porsche 935 K3 was produced by Kremer Racing a total of only 13 times and was used in the late 70s, early 80s.The stylish Porsche recorded its greatest victories at the endurance race in France and with the overall victory in the German Racing Championship in 1979.At Carrera, the Porsche Kremer 935 K3 "Kremer Racing, No.62", darts around the curves and immediately attracts all eyes thanks to the pink hood. -> EAN 4007486309296 With best regards from Team Modellbahn Kramm

2023-10-21

Faller 120148 - H0 large coal plant complete with high bunker

H0-Spur, Großbekohlungsanlage Vorbildgetreue Bekohlungs¬anlage, komplett mit Hochbunker, zwei Kohlebansen (je 170 mm), Portalkran und ein Beutel »Kohle« zur realistischen Ausschmückung. Beim Kran kann mit FALLER-Motor (Art. 180629, liegt nicht bei) das Kran¬führer¬haus mit dem Ausleger um 360° gedreht werden. Auf der 340 mm langen Gleis¬attrappe kann der Kran manuell verschoben werden. Der Hochbunker entspricht in seiner Konstruktion dem Einheitshochbunker der Deutschen Bahn. Der Portalkran ist auch als Einzel¬modell (Art. 120162) erhältlich. Dieser Bausatz enthält: 198 Einzelteile in 4 Farben, Fensterteile und 1 Bauanleitung. -> EAN 4104090001483 With best regards from Team Modellbahn Kramm

2023-10-20

Brawa 50683 - H0 AC Sound 6er Set Rheingold with BR 01 Ep2 of the DRG

H0-gauge AC digital with sound Set of 6 DRG Rheingold with class 01 steam locomotive and passenger train Ep2 plus free Brawa backpack. Road number: steam locomotive BR 01 (road no. 01 069), baggage car (road no. Cologne 90 202), 2x passenger cars 1st class (road no. Cologne 20 506 / Cologne 20 501), 2x passenger cars 2nd class (road no. Cologne 24 502 / Cologne 24 505) The car set cannot be ordered separately. Individual cars are available as add-ons: Item no. 45425, 45426 and 45427 Pw4ü Pr 16 baggage car, DRG When you buy the set, you get an exclusive BRAWA backpack worth € 49.90 (manufacturer's suggested retail price) for free. Steam locomotive BR-01: Boiler, driver's cab and tender as finely detailed plastic components Openworked ingot frame and spoked wheels made of zinc die casting Smoke generator and sound decoder built in or prepared for installation Driver's cab illuminated Lighting appropriate for the era Standard shaft at the rear guided by a guide rail Close coupling between locomotive and tender True to original reproduction of the standing boiler rear wall Finest printing and painting Lines and attached parts with thin walls Individually applied steps and stairs Drive in the tender for optimum running characteristics Single axle bearing in metal True to scale axle base Metal driving and coupling rods 850 mm leading wheels Bolted-on discharge boxes on the cylinders Control carrier in cast design Tender 2'2' T32 Engine lighting (digital version) Fire flicker (digital version) Note on the minimum radius of the BR 01: The models of the BR 01 steam locomotive are technically suitable for operation with a minimum radius of R 360 mm. For optimum running characteristics, we recommend operation from R 420 mm. PERSONNEL CARS: Differences in design according to variants Differently designed roofs and car floors Exact reproduction of the Görlitz II heavy bogies Complete reproduction of the brake system Individually inserted table lamps Exactly reproduced vehicle frames Multi-part interiors Close coupler kinematics Three-point suspension in metal axle brackets Metal wheels Accurately fitted windows Finely engraved details with sharp contours Entrance lighting (digital version) Ceiling lighting (digital version) Table lighting (digital version) Sound: operating and kitchen sounds (digital version) Digital decoder (digital version) Current-carrying coupling for central power supply (digital version) -> EAN 4012278506838 With best regards from Team Modellbahn Kramm

2023-10-17

Carrera 30941 - CARRERA DIGITAL 132 - Dodge Charger Daytona No.42

Race down the track with the muscle car! The Dodge Charger Daytona was the successor to the Dodge Charger 500 and was only produced in 1969 due to moderate sales figures. The muscle car became famous because of the famous country singer Marty Robbins, who drove the flashy car with pink body and yellow roof in numerous NASCAR races. The 1:32 scale model not only looks extremely cool, the Dodge Charger Daytona "No.42" is also perfect for the famous tracks. If you like bright colors, you are sure to get the envious glances of the competition. -> EAN 4007486309418 With best regards from Team Modellbahn Kramm

2023-10-17

Roco 71226 - H0 DC sound electric locomotive Rh 372 CD Cargo VI

H0-gauge DC digital with sound, electric locomotive class 372 of the CD Cargo, era VI. Completely new construction! - Model in finely detailed design with many separately applied plug-in parts - Completely newly developed pantographs with innovative fasteners - Elaborate design of the roof area as well as the fan louvers with a clear view - Filigree design of the bogies as well as the spoked wheels - With enclosed track clearers and air reservoirs in closed form for prototypical display in the showcase - Representation of the modified LED lamps with prototypical cool white LEDs - Cab and control panel lighting as well as engine room lighting - Newly developed "Dynamic Sound" package for even better deep sound with two speakers For continuous electric operation on the Dresden-Prague railroad line, CSD, together with the Deutsche Reichsbahn (GDR), procured a total of 35 multi-system locomotives that could be used on both the CSSR 3 kV direct current network and the GDR 15 kV alternating current network. After testing of a prototype, fourteen series-produced machines were put into service starting in 1991 and stationed at the Decín locomotive depot. With the establishment of the freight division CD Cargo in 2007, nine locomotives were assigned to the new company. Thanks to the fact that until 2016 they were the only locomotives of CD Cargo that could be used in the German railroad network, all locomotives were gradually modernized and painted in the new company colors. In addition to their main use for transporting trains at the Decín/Bad Schandau border crossing (and on to Dresden and Leipzig), they are occasionally used in domestic traffic and also reach border stations to Poland. -> EAN 9005033712266 With best regards from Team Modellbahn Kramm

2023-10-17

Faller 191776 - H0 gauge, railroad steel bridge

This kit contains: 144 single parts in 3 colors, 1 decoration and 1 building instruction. - Dimensions: 1100 x 115 x 255 mm, clearance: 150 mm -> EAN 4104090917760 With best regards from Team Modellbahn Kramm

2023-10-17

Carrera 30940 - CARRERA DIGITAL 132 - Ford Mustang GTY No.55

CARRERA DIGITAL 132 - Ford Mustang GTY No.55 -> EAN 4007486309401 With best regards from Team Modellbahn Kramm

2023-10-17

Faller 232386 - N 2 townhouses Beethovenstrasse

N-gauge, 2 townhouses Beethovenstrasse - Redesigned! - Renovated townhouses with bakery and small gallery on the ground floor.In the attic there are two small dormers each. The two townhouses are an ideal addition to the town row "Beethovenstrasse", art. 232385 and can also be built in halves. This kit contains: 434 individual parts in 9 colors, window parts, 2 curtain masks, 2 decos and 2 building instructions. - Dimensions row house 1: 65 x 58 x 118 mm - Dimensions row house 2: 65 x 58 x 118 mm - Total dimensions: 130 x 58 x 118 mm -> EAN 4104090323868 With best regards from Team Modellbahn Kramm

2023-10-15

Carerra 30911 - Audi R8 LMS No.29, Winner 24h Nürburgring

CARRERA DIGITAL 132 - Audi R8 LMS No.29, Winner 24h Nürburgring 24 hours full throttle! At the 2017 Nürburgring 24-hour race, the Land Motorsport team secured overall victory for the first time in its more than 20-year history. The Audi R8 LMS "No.29", Winner 24h Nürburgring, which was chased across the asphalt by Markus Winkelhock in its original size, cuts a very good figure even on a small scale and will thrill GT fans. The mint-green dream car is definitely an eye-catcher on your Carrera racetrack when you chase it around the bend. -> EAN 4007486309111 With best regards from Team Modellbahn Kramm

2023-10-14

Kato 14805-1 - N Modern streetcar articulated railcar blue

N Modern streetcar articulated railcar blue N-gauge, Modern streetcar articulated railcar in neutral color scheme, blue, era V-VI. The railcar is a bidirectional vehicle, i.e., with doors and cabs on both sides. The vehicle impresses with fine detailing, free view in the passenger compartment and a light change white/red. Interior lighting can be retrofitted. Model features: - New construction of a modern bi-directional vehicle - Doors on both sides - White/red light change - Free view through the passenger compartment - fantastic running characteristics - Smallest negotiable radius: 90 mm -> EAN 4949727683478 With best regards from Team Modellbahn Kramm

2023-10-13

Faller 232385 - Row of townhouses Beethovenstraße

N-gauge, row of townhouses Beethovenstraße - Lively city scene! - The town row consisting of 4 buildings with 2 corner and 2 row houses offers many variation and combination possibilities. On the first floor of each house there are stores and business premises. The upper floors are typical old town residential units. The two row houses can also be built in halves. This kit contains: 1084 individual parts in 17 colors, window parts, 4 curtain masks, 4 decos and 4 building instructions. - Dimensions row house 1: 65 x 58 x 118 mm - Dimensions row house 2: 65 x 58 x 118 mm - Dimensions corner house 1: 75 x 75 x 123 mm - Dimensions corner house 2: 75 x 75 x 123 mm - Dimensions driveway: 32 x 3 x 27 mm (2 x) - Overall dimensions: 298 x 75 x 123 mm -> EAN 4104090323851 With best regards from Team Modellbahn Kramm

2023-10-05

Brawa 50682 - H0 DC Sound Set of 6 Rheingold with BR 01 Ep2

H0-gauge DC digital with sound Set of 6 DRG Rheingold with class 01 steam locomotive and passenger train Ep2 plus free Brawa backpack. Road number: steam locomotive BR 01 (road no. 01 069), baggage car (road no. Cologne 90 202), 2x passenger cars 1st class (road no. Cologne 20 506 / Cologne 20 501), 2x passenger cars 2nd class (road no. Cologne 24 502 / Cologne 24 505) The car set cannot be ordered separately. Individual cars are available as add-ons: Item no. 45425, 45426 and 45427 Pw4ü Pr 16 baggage car, DRG When you buy the set, you will receive an exclusive BRAWA backpack worth € 49.90 (manufacturer's suggested retail price) for free. Steam locomotive BR-01: Boiler, driver's cab and tender as finely detailed plastic components Openworked ingot frame and spoked wheels made of zinc die casting Smoke generator and sound decoder built in or prepared for installation Driver's cab illuminated Lighting appropriate for the era Standard shaft at the rear guided by a guide rail Close coupling between locomotive and tender True to original reproduction of the standing boiler rear wall Finest printing and painting Lines and attached parts in low wall thickness Individually applied steps and stairs Drive in the tender for optimum running characteristics Single axle bearing in metal True to scale axle base Metal driving and coupling rods 850 mm leading wheels Bolted-on discharge boxes on the cylinders Control carrier in cast design Tender 2'2' T32 Engine lighting (digital version) Fire flicker (digital version) Note on the minimum radius of the BR 01: The models of the BR 01 steam locomotive are technically suitable for operation with a minimum radius of R 360 mm. For optimum running characteristics, we recommend operation from R 420 mm. PERSONNEL CARS: Differences in design according to variants Differently designed roofs and car floors Exact reproduction of the Görlitz II heavy bogies Complete reproduction of the brake system Individually inserted table lamps Exactly reproduced vehicle frames Multi-part interiors Close coupler kinematics Three-point bearing in metal axle brackets Metal wheels Accurately fitted windows Finely engraved details with sharp contours Entrance lighting (digital version) Ceiling lighting (digital version) Table lighting (digital version) Sound: operating and kitchen sounds (digital version) Digital decoder (digital version) Current-carrying coupling for central power supply (digital version) -> EAN 4012278506821 With best regards from Team Modellbahn Kramm

2023-09-21

Noch 63010 N-gauge Universal platform, set of 3

Universal platform, set of 3 The individually designable platform! Until now, model railroaders were bound to the prefabricated widths and lengths of the available platforms, and the conversion of plastic platforms required a lot of practice. With the NOCH universal platform, this becomes much easier. It is made of special laser cardboard that combines two key properties: first, it is very stable, and second, the cardboard can be easily shaped with a craft knife or scissors. The wide base plate also makes it possible to create platforms with a curve radius. In order to be able to offer model railroaders with a larger track layout in the station area an inexpensive bulk pack, there is a new set of 3 from NOCH. With the three included universal platforms, longer and more varied platforms can be individually designed. Note: Suitable special glue is included. Dimensions - each 14.8 x 4.5 cm, 0.6 cm high EAN 4007246630103

2023-09-21

Kibri 39373 H0-gauge

Bonn station - kit In the original, the Bonn station represents a typical city station, which is laid out as a through station. When looking at the kibri model, it very quickly becomes clear why the novelty, which was released in 1981 at the Nuremberg Toy Fair, thrilled all spectators without exception. In its overall appearance, the Bonn station in H0 scale with a total length of almost one meter already represents a superlative in the kit with over 500 individual parts. Not only the fidelity to scale, but also the pattern validity can be transferred to the entire architecture. With its center and the two corner buildings as well as the platform and street side, the model building in H0 scale corresponds to the prototype in all essential details up to the skillfully applied color scheme. Due to its respectable size, this kit is a great eye-catcher for any H0 layout. In the model, it impresses with its overall proportions as well as with its numerous details in the form of corners and angles. The kit is complemented by a whole range of accessories from the kibri assortment for the design of buildings and platforms, e.g. the Bonn platform hall, item 39565. Halls and platforms are adapted to Märklin's C-track system, an elevation of the platforms makes them ICE-capable as in reality. Dimensions - L 98.5 x W 25.5 x H 23 cm EAN 4026602393735

2023-09-13

Revell 05599 - Titanic + 3D Iceberg

1:600 RMS Titanic + 3D Puzzle (Iceberg) Item description: Iceberg ahead! This warning unfortunately came too late for the Titanic, so that she sank after the collision sank in the icy waters of the Atlantic. The scene of the collision can be recreated with this set consisting of the easy-click kit of the of the RMS Titanic and a Revell 3D puzzle diorama with iceberg. can be recreated. In addition to the easy-click kit of the Titanic and the 3D puzzle diorama, 6 basic colors and a brush are included. - easy-click kit of the RMS Titanic - Original Revell 3D puzzle diorama - 6 base colors - paintbrush Tinkering fun with great results for everyone from 10 years. Due to the innovative easy-click system, quick success is guaranteed: Multicolored, precision-manufactured components are stably connected by simple and decorated with stickers. A painting is not necessary! Optionally, the model can also be painted and thus becomes a very personal unique specimen. A recommendation with up to 5 colors is included in the assembly instructions. -> EAN 4009803055992 With best regards from Team Modellbahn Kramm

2023-09-13

Faller 130702 - H0 2 terraced houses Beethovenstraße

H0-gauge, 2 terraced houses Beethovenstraße Newly designed! Renovated row houses with bakery and small gallery on the ground floor. In the attic there are two small dormer windows each. The two terraced houses are an ideal addition to the town row "Beethovenstraße", item 130701 and can also be built in halves. This kit contains: 418 individual parts in 9 colors, window parts, 2 curtain masks, 2 decos and 2 building instructions. -> EAN 4104090307028 With best regards from Team Modellbahn Kramm

2023-09-08

Carrera 30917 - CARRERA DIGITAL 132 - BMW M6 GT3 „Molitor Racing, No.14“

The BMW M6 GT3 "Molitor Racing, No.14" competed in the 2019 ADAC GT Masters and managed to secure victory in the first race at the Red Bull Ring by just 0.29 seconds. The Molitor Racing team was the only team to compete with the BMW M6 GT3. The racing machine, equipped with a V8 bi-turbo engine, hits the track with around 585 horsepower under the hood and, in its true-to-the-original 1:32 scale design, can also put its foot down on the Carrera racetrack. With plenty of practice on the hand controller, you too can take victory with this super sports car. -> EAN 4007486309173 With best regards from Team Modellbahn Kramm

2023-09-08

Faller 130364 - H0-gauge Mansion

H0-gauge, mansion A two-story mansion built in the architectural style of the turn of the century with brick window surrounds, covered columned entrances and balconies on the upper floor. The original building is located in Waldkirch/Breisgau. This kit contains: 237 parts in 5 colors, window parts, 2 curtain masks and 1 building instruction. -> EAN 4104090003647 With best regards from Team Modellbahn Kramm

2023-09-03

Revell 07072 - 1:24 Kit VW Golf I GTi

1:24 Kit VW Golf I GTi At the 1975 IAA, VW presented a vehicle that was initially developed without the knowledge of the board. This sporty offshoot of the Golf 1 offered the qualities that characterize a true sports car: a low curb weight paired with a powerful engine. Available from 1976, the outrageously fast GTI revolutionized the car world. Everyone now has an affordable sports car suitable for everyday use that can easily keep up with the expensive competition. The 110 hp GTI truly democratized the sports car sector. Wheel arch extensions, wider wheels, the large front spoiler and a red border around the front grille characterize the compact sports car, which accelerates from 0 to 100 km/h in just 9.2 seconds and very quickly becomes an icon. The model: - Faithfully reproduced body with typical wheel arch extensions - Separate, movable engine hood - Multi-part, detailed four-cylinder engine - Separate exhaust system - Detailed interior with instrument panel, seats and back seat - Typical steering wheel - Faithfully reproduced dashboard for left-hand drive or right-hand drive version - Movable wheels - Large front spoiler - Rubber-like tires - Instructions and authentic decals with different license plates (D, GB, F, NL, B, A, CH, I, S, DK) For base painting we recommend the following Revell paints: 2, 9, 78, 90, 99, 302, 378, 730, 731 -> EAN 4009803070728 With best regards from Team Modellbahn Kramm

2023-09-02

Hobbytrain 24851 - Set of 2 lightweight tank car

Set of 2 PKP Petrochemia lightweight tank cars, era IV/V, N-gauge. Model features: - New construction - Consideration of all design differences - With and without brakeman's cab - Attached etched parts - Kinematics with NEM coupler mount Starting in 1941, Waggonfabrik Uerdingen, together with several other companies such as MAN, built over 3700 lightweight tank cars. The two-axle cars had a capacity of 30m3. In the course of the 2nd World War, the wagons came to almost all European railroad administrations and, as in Germany, were still used in some cases until the early 2000s. -> EAN 4250528617280 With best regards from Team Modellbahn Kramm

2023-09-01

Fleischmann 831515 - N-gauge, 2-piece set: Covered freight cars, DR, Era IV.

N-gauge, 2-piece set: Covered freight cars, DR, Era IV. Set of two German State Railroad type Gbs boxcars. - Both cars have different car numbers -> EAN 4005575255837 With best regards from Team Modellbahn Kramm

2023-09-01

Revell 67667 1:24 Kit VW T2 Bus (New Tool)

1:24 Kit VW T2 Bus (New Tool) Simple kit to the VW Type 2 T2, which was produced at the VW plant in Hanover until 1979 over 2.5 million times and had, among other things, a full-length windshield and a sliding door. - Multi-part engine - Movable sliding door - Decals and stickers with various license plates (D, NL, F, GB, B, A, CH, I, S and USA) - Base colors and brushes The innovative easy-click system guarantees quick success with this model: Multi-colored, precisely manufactured components are stably connected by simply plugging them together and decorated with stickers. -> EAN 4009803067667 With best regards from Team Modellbahn Kramm

2023-09-01

Faller 239002 - N gauge, set railroad depot

N-gauge, set railroad depot Contents: - 1x locomotive shed - 1x water tower - 1x investigation pit - 1x small coaling station -> EAN 4007486309173 With best regards from Team Modellbahn Kramm

2023-08-31

Brawa 67811 - N Covered freight car BASF dry ice DB, era IV

N-gauge, DB boxcar Gbs-uv 253 BASF Trocken Eis, road number: 16 80 1415 503-5 (P), era IV Model details: - Axle holder made of stamped sheet metal. - Extra applied brake system, spring assemblies, wheel bearings and steps - Fine engravings and rivets - Finest printing and painting - Close coupling kinematics - True to original replica of the frame - Wheels also profiled on the inside -> EAN 4012278678115 With best regards from Team Modellbahn Kramm

2023-08-31

Fleischmann 831514 - N 2-piece set: Covered freight car DB

N-gauge, 2-piece set: Covered freight cars, DB, Era IV. Set of two German Federal Railroad type Gbs 252 boxcars. - Version without sprinkler system - Both cars have different car numbers -> EAN 4005575255820 With best regards from Team Modellbahn Kramm

2023-08-31

Kibri 37759 - N Platform Osterburken

N-gauge, Osterburken platform - kit. The section with covered waiting area has an ICE elevation. - L 33,8 x W 3,8 x H 5,8 cm -> EAN 4026602377599 With best regards from Team Modellbahn Kramm

2023-08-15

Viessmann 5223 - Control module for light exit signal

"Control module for light-exit signal". Suitable for all 4-word light-exit signals from track 0 to Z (except signals with Multiplex technology). The module generates all 4 possible exit signal aspects (Hp0, Hp1, Hp2, and Sh1). Prototypical soft signal aspect change. A contact for train control is integrated. With this contact, the track in front of the signal is switched off when the signal is at a stop. Control is by means of the Art. 5545 pushbutton control panel, individual pushbuttons, switching tracks, track contacts, or digital magnetic particle decoders. In addition, there is an output for controlling a distant signal via the control module Art. 5220. -> EAN 4026602052236

2023-08-15

Jägerndorfer 18102 - H0/AC sound electric loco Rh 1116 181 Taurus ÖBB

H0-gauge AC digital with sound, electric locomotive Rh 1116 181 Taurus of the ÖBB in Cityjet colors, era VI. To match the double-decker cars, ÖBB has now wrapped the first Taurus in the Cityjet design. The 1116 181 will be used in local service as well as in front of freight trains. Model: - Limited and licensed model - Light change white/red - high beam - Interface: 21mtc - AC Digital with sound decoder -> EAN 9120071238896

2023-08-15

Faller 130270 - H0/1:87 kit rural half-timbered house

H0-gauge, rural half-timbered house. House with half-timbering and decoration parts. This kit contains: 195 individual parts in 7 colors, window film, 1 curtain mask and 1 building instruction. -> EAN 4104090302702

2023-08-14

Revell 07100 1:24 kit Mercedes Benz SLS AMG

1:24 Mercedes Benz SLS AMG kit. With its wide grille and large star, long hood, distinctive doors and gills behind the front fenders, the first vehicle developed independently by AMG is reminiscent of the legendary Mercedes-Benz gullwing cars from the mid-1950s. The two-seater is powered by the world's most powerful series-produced V8 engine with a displacement of 6.3 liters and 420 KW output. The SLS offers remarkable performance and thrilling driving dynamics. The two-door car accelerates from 0 to 100 km/h in just 3.8 seconds, and from 0 to 200 km/h in 12.0 seconds. Its top speed is 317 kilometers per hour. In keeping with the original, the gullwing doors can be raised on the model, as can the engine hood. Model details: - Faithfully reproduced body with fine surface structures. -Detailed interior with authentic instrument panel and textured seats - Separate, movable engine hood - Highly detailed, multi-part 8-cylinder engine - faithfully reproduced rims and brakes - steerable front axle - detailed wheel suspensions - movable wheels - detailed chassis - chromed parts - comprehensive decal with international license plates (D, NL, F, CH, GB) -> 4009803071008

2023-08-14

Fleischmann 845607 - N-gauge 2-piece set: ÖBB heavy duty flat car

N-gauge, 2-piece set: ÖBB heavy load flat car, Era III. Car set with two heavy load flat cars, class Ssy, of the Austrian Federal Railways. - Loaded with slabs - Both cars with different car numbers -> EAN 4005575255851

2023-08-14

Faller 222198 - N/1:160 portal crane

N-gauge portal crane The large portal crane can be fitted with a clamshell grab, hook or log grab, and is thus suitable for operation in the most varied working areas. Cabin and jib can be adjusted manually. Clearance under the gantry 43 mm. Crane can be moved manually on its own 190 mm track. -> EAN 4104090021986

2023-08-13

Carrera 30943 - DIG132 CARRERA DIGITAL 132 - Carrera Ambulance Emergency

CARRERA DIGITAL 132 - Carrera Ambulance Emergency with blue lights and Grid Girl as nurse. The rescue on the race track! When things get really busy on the racetrack and the Carrera drivers chase the cars around the track at full throttle, the odd crash is bound to happen. In the new season, the Carrera ambulance is ready and waiting in the pit lane for just such an eventuality. With flashing blue lights and siren, the quick helper is on the scene immediately and the Grid Girl nurse gets every injured Carreraristi back on track straight away. -> EAN 4007486309432

2023-08-12

ESU 31444 - H0 DC/AC sound diesel locomotive KG230 Ford factory

H0-gauge DC/AC digital with sound, diesel loco KG230 blue, Ford plant Köln-Niehl, era IV Model details: - Metal frame and front ends - Opened fan grille at the front of the long front end - Finely detailed multicolored driver's cab - Numerous separately applied details on the chassis - Separately applied and partially openwork steps - Freestanding handlebars - Spring buffers - Locomotive engineer figure - Height-adjustable digital shunting coupler for all bow couplers - Bell-type armature motor with flywheel mass - Drive on both axles, one traction tire - LokSound 5 decoder for DCC, Motorola®, M4, and Selectrix® operation - Independent registration to command stations with RailComPlus® functionality - PowerPack storage capacitor for uninterruptible power supply - Loudspeaker with large sound capsule for maximum sound enjoyment - Universal electronics with plug-in wiper and slide switch for switching between two-wire and and center conductor operation - Smoke generator synchronous to the locomotive sound - Digitized original sounds of a KG230 B with 12-cylinder Deutz engine A12 L 714 - Direction-dependent light change, train-side head signal can be switched off, shunting, cab and driver's desk lighting - Brake spark during sharp braking - Chassis lighting - Pipette for filling the smoke generator is included - Two different antennas are included - Length over buffers = 92.3 mm Prototype: In the power class of a Köf III, Deutz offered the two-axle diesel-hydraulic KG 230 B starting in 1962. KG stands for small locomotive with cardan shaft drive, 230 for the output in horsepower and B for the axle arrangement. The in-house air-cooled twelve-cylinder A12L714 engine produced 230 hp at 2000 rpm. The seven KG 230s built for explosion-sensitive plants carried a water-cooled six-cylinder diesel engine as a deviation. The transmissions of most locomotives were set to a maximum speed of between 20 and 30 km/h in favor of tractive effort. Depending on the track situation, the orderers had additional metal placed in the frame area so that the locomotives could be ordered with a weight of 26 to 36 tons. The two locomotives of Bayernhafen AG and the BEHALA locomotives even had multiple control systems. Despite their advanced age, many of the two-axle locomotives still in service today still carry their original engines. Since most of the companies owned only a few locomotives, they were kept in good technical condition, since they could not be dispensed with. The few employees who had been trained on the locomotives knew exactly the limits of their locomotives over the years, and the simple and robust truck technology could often be kept running with the plant's on-board resources. Deutz delivered a total of 64, Henschel another three KG 230 B mainly to German owners, but also to France, Italy, Luxembourg and the Netherlands. One locomotive was procured by the German Federal Post Office, and other locomotives in government service were owned by the Italian state railroad FS and the Spanish RENFE. The list of owners reads like a who's who of major European industry: BASF, RAG, Wintershall, BP, DEA, Shell, VTG, Arbed, Thyssen, Mannesmann, Feldmühle AG, Krupp Stahl, Rheinpreußen, Rhenus, RWE, Ford, MAN, Volkswagen, Kali + Salz, Portland Zement, Holcim Zement, Südzucker AG. Port logistics in Aschaffenburg, Berlin, Braunschweig, Bremerhaven, Ginsheim-Gustavsburg, Hanover, Regensburg and at Luxport in Wasserbillig also relied on the stability and tractive power of the air-cooled two-axle trucks. The high quality of the design is demonstrated by the fact that the locomotives are not scrapped when there is no demand, but are sold on. In elegant red paint, a locomotive at the 241-A-65 club carefully moves valuable museum vehicles -> EAN 4044645314449

2023-08-11

Faller 120162 - H0-gauge, 1:87 kit portal crane

H0-gauge, gantry crane The large gantry crane fits all areas where cranes are used: Port, industry, railroad etc. The crane can be equipped with grab bucket, crane hook or wooden grab. With the FALLER motor (item 180629, not included) the crane cab can be rotated 360° with the boom. The crane can be moved manually on the 340 mm long track dummy. The crane is identical in construction to the crane of the coaling station (item 120148). This kit contains: 113 parts in 3 colors, window parts and 1 building instruction. -> EAN 4104090001629

2023-08-06

Carrera 30367 DIG132 Digital track extension set

Set for track extension for Carrera racetracks DIGITAL 124, DIGITAL 132 For expanding the race track Package contents: 4 standard straights, 1 turnout (left), 1 double turnout, 1 lane change curve (right, outside to inside) Individual driving fun with the digital track extension set Something new more often! Even if you are always working on improving your lap time with the old familiar and beloved slot car track, at some point the desire for more variety arises. And that's exactly what this digital track expansion set is for. With four standard straights, a left turnout, a double turnout, track section interlocks and a lane change curve, new track elements can be installed in the Carrera DIGITAL 124 and Carrera DIGITAL 132. The tracks are on a scale of 1:24 and are an ideal match for the two aforementioned racetracks. The turnouts ensure rapid lane changes and give you the opportunity to overtake the opposing car in an imaginative way, especially during chases. Meanwhile, the straights extend the driving pleasure and expand the track. Info: This digital expansion set can be used for upgrading. -> EAN 4007486303676

2023-08-05

Fleischmann 838309 N-gauge high capacity sliding wall car Transwaggon SBB

N-gauge, four-axle high capacity sliding wall car, type Habbiins, the Transwaggon, era VI, SBB - Finely detailed design - With separately applied handle bars Prototype: When things get touchy - these large-capacity cars are equipped with sliding walls that can be moved by one person. When open, access to half the load area is possible from both sides. Loading and unloading with forklifts is thus possible both from a ramp and from level ground. The trolley is particularly suitable for transporting paper rolls, cellulose, lumber, wood and fiberboard, and palletized goods. To secure the load of horizontal paper rolls, the trolleys are equipped with 24 pieces of metal quick-locking wedges, which are stored in storage compartments in each end wall when not in use. The underframe consists of longitudinal girders, headers and four closed boxes connecting the two longitudinal girders. In the head section, the floor is made of a checker plate. -> EAN 4005575254441

2023-08-04

Faller 222137 N/1:160 coaling station kit

N-gauge, prototypical coaling station, complete with high bunker, 1 coal hopper (190 mm), and gantry crane (like item 222198). - Parallel track spacing for high bunker 48 mm. - Clearance height: 40 mm - Coal for decoration is included - This kit contains: 193 parts in 8 colors and 1 building instruction. - Dimensions: 189 x 162 x 141 mm -> EAN 4104090021375

2023-07-30

Hobbytrain 43034 H0/DC 3-piece DB Era 3 car set

H0-gauge DC, set of 3 pieces: 1x BC4ümg, 2x C4ümg, era III, of the DB Model features: - Detailed design - Consideration of all design differences - Numerous applied details - Extensive printing - Prepared for interior lighting We complete the series of express trains with the D83/84 from the winter timetable 1956 of the German Federal Railroad. This consists of the five-car main train Munich-Hamburg and the three-car wing train Stuttgart-Würzburg-Hamburg. At that time, new m cars were scattered throughout Germany in trains, block trains of m cars were rather rare. -> EAN 4250528617716

2023-07-29

Piko 55921 H0/AC AC sound dining car WRm '61 DR IV

H0-gauge AC digital with sound, DR Mitropa dining car WRm 61, era IV. The Piko Expert Plus dining car model impresses with a variety of sound and light functions, such as typical kitchen and dining car sounds as well as corresponding dialogs. The dining car comes ex factory with a PIKO SmartDecoder XP 5.1 sound of the latest generation. Model Details: - Power system: alternating current - Railroad management: DR - Era: IV - Dimensional drawing: LüP / length over buffers - Minimum radius [mm]: 358 - Digital interface: NEM 662 Next18 - Installed decoder: Next18 sound decoder - (Interior) lighting: Switchable interior lighting factory-equipped - Coupler: NEM shaft + close coupler linkage - Sound: PIKO sound decoder factory fitted -> EAN 4015615559214

2023-07-28

Faller 191784 H0/1:87 Kit Small ARAL gas station

H0-gauge, 1:87 kit Small ARAL gas station - Dimensions: 141 x 97 x 53 mm -> EAN 4104090917845

2023-07-23

Carrera 31050 - Digital 132, BMW 320 Turbo Flachbau "Nr.72" - Limited Edition

Carrera Digital 132 BMW 320 Turbo Flat "No.72 Novelty 2022 - Limited Edition 2022 Limited to 1.999 pieces worldwide. With front (xenon) and rear lighting. Carrera DIGITAL 132 vehicle on a scale of 1:32, can also be used on analogue (Carrera Evolution)! Absolutely detailed and true to original digital Carrera vehicle, with realistic acceleration and braking behavior, individually codable and digitally controllable. -> EAN 4007486310506

2023-07-22

Fleischmann 825753 - N-gauge 2-piece set: Circus Knie SBB

N-gauge, 2-piece set: "Circus Knie", SBB, Era VI. Car set consisting of two Swiss Federal Railways type Kps stake cars loaded with four cars from Circus Knie. - In cooperation with Artitec - Ideal addition to the 825732 set -> EAN 4005575255899

2023-07-21

Faller 232387 - N/1:160 2 townhouses Beethovenstraße

N-gauge, 2 townhouses Beethovenstraße - Fully renovated! - The corner and row house of Beethoven Street have received a new coat of paint. Next to the phone store is a restaurant with regional cuisine. Student apartments are located on the upper floors. The row house can be built in half. This kit contains: 562 individual parts in 10 colors, window parts, 2 curtain masks, 2 decos and 2 building instructions. - Dimensions corner house: 75 x 75 x 123 mm - Dimensions row house: 65 x 58 x 118 mm - Dimensions driveway: 32 x 3 x 27 mm - Overall dimensions: 172 x 75 x 123 mm -> EAN 4104090323875

2023-07-16

Hobbytrain 43032 H0/DC car set 5-piece era 3 of the DB

H0-gauge, set of 5 pieces: 1x B4ümg, 1x BR4ümg, 3x C4ümg, era III, of the DB Model features: - Detailed design - Consideration of all design differences - Numerous applied details - Extensive printing - Prepared for interior lighting We complete the series of express trains with the D83/84 from the winter timetable 1956 of the German Federal Railroad. This consists of the five-car main train Munich-Hamburg and the three-car wing train Stuttgart-Würzburg-Hamburg. At that time, new m cars could be found scattered in trains all over Germany; block trains consisting of m cars were rather rare. -> EAN 4001883377841

2023-07-15

Märklin 37784 - H0/AC Sound, ICE 3 Railbow ICE electric multiple unit train, 5-pcs

H0/AC digital with sound, electric multiple unit train ICE 3 Railbow ICE, 5-piece DBAG. Highlights: - Attractive design with the rainbow-colored stripe. - High beams can be controlled digitally. - LED interior lighting installed as standard. - Extensive sound functions. This has caused a big stir: DB sent an ICE 3 - the Tz 304 "Munich" multiple unit with the two power cars 403 022-7 and 403 504-4 - onto the rails on July 9, 2021. Instead of the usual red stripe, this train is adorned with a stripe in rainbow colors. In this way, Deutsche Bahn wants to set an example for diversity and tolerance, for respectful and trustful cooperation and for an appreciative approach to the diversity of all people. The multiple unit train runs in the ICE 3 schedule and thus carries a very special message as a "Railbow ICE" throughout the entire Federal Republic. We can only endorse this message for diversity, tolerance and an appreciative approach to one another. Märklin and TRIX will also be offering this special ICE for H0 model railroad enthusiasts. We are therefore pleased to be able to present this train already now. Like its prototype, the Märklin Rainbow ICE 3 with item no. 37784 has a stripe in rainbow colors instead of the red one. The 5-part basic unit will be equipped with an mfx+ digital decoder, extensive sound functions, built-in LED interior lighting, high beam and pickup shoe switching. For prototypical expansion to an 8-car unit, we offer the 43739 supplementary car set, also equipped with LED interior lighting. -> EAN 4001883377841

2023-07-14

Faller 190077 H0 Action set townhouses Römerberg-Ostzeile 6-pcs

H0-gauge, Action Set Town Houses Römerberg-East Row Six-part old town building set based on the original model of the east row at Frankfurt's Römerberg, historically reconstructed in 1983, with stone first floors and partially half-timbered upper floors. This kit contains: 728 individual parts in 20 colors, window parts, 7 curtain masks, 3 decos and 3 building instructions. - Dimensions house 1: 92 x 77 x 200 mm - Dimensions house 2: 90 x 40 x 176 mm - Dimensions house 3: 82 x 60 x 185 mm - Dimensions house 4: 94 x 79 x 198 mm - Dimensions house 5: 97 x 50 x 158 mm - Dimensions house 6: 107 x 74 x 191 mm -> EAN 4104090900779

2023-07-08

Trix 16162 - N Analog Diesel Locomotive BR V 160 DB "Lollo"

N-gauge analog, DB class V 160 003 diesel locomotive, Era III. Model: The locomotive has a digital interface, 5-pole motor. 4 axles powered, traction tires, tip signal. Length over buffers 100 mm. Highlights: - New V 160 003 car number. Prototype: German Federal Railroad V 160 003 pilot series diesel locomotive. Nickname "Lollo". B'B' wheel arrangement, built from 1960. Use: passenger and freight trains. -> EAN 4028106161629

2023-07-07

Faller 232324 - N/1:160 kit townhouses set 50s 4-piece

N-gauge, townhouses set 4-part building set for a street line from the 1950s, consisting of two four-story townhouses with stucco facades and stores, a two-story apartment building with a courtyard drive-through, and a demolition house with construction debris. The models can be built individually and can be arranged in a variety of ways. This kit contains: 265 individual parts in 20 colors, window film, 3 curtain masks, 1 decoration and 4 building instructions. - Dimensions drugstore: 93 x 93 x 147 mm - Dimensions townhouse 1: 93 x 88 x 101 mm - Dimensions bakery: 93 x 93 x 140 mm - Dimensions demolition house: 152 x 82 x 114 mm -> EAN 41040903240

2023-07-02

Kibri 12248 - H0/1:87 Kit H0-gauge cattle truck with trailer

H0-gauge, cattle truck with trailer, kit (old item number: without cows) MAN 2-axle tractor with KÖPF cattle body and 3-axle trailer. - L 22,0 - 24,5 x W 3,0 x H 4,5 cm - Level of difficulty: 2 (advanced) -> EAN 4026602122489

2023-07-01

Märklin 39595 - H0/AC Sound E-Lok Serie Ce 6/8 II Krokodil SBB

H0-gauge AC digital with sound, electric locomotive series Ce 6/8 II Crocodile, era VI. Highlights: - Version as a museum locomotive - Highly detailed metal construction - Locomotive powered with 2 high-efficiency motors and flywheel masses - With mfx+ game world digital decoder and extensive operating and sound functions Model: The locomotive comes with an mfx+ digital decoder and extensive sound functions. 2 controlled high-efficiency propulsion systems with flywheels, 1 motor in each propulsion frame. 3 axles and jackshafts powered in each case. Traction tires. Articulated running gear for curves. The triple headlights change over with the direction of travel and 1 white marker light (Swiss light changeover) will work in conventional operation and can be controlled digitally. The lighting can be switched to 1 red marker light for solo running. Maintenance-free warm white and red LEDs are used for the lighting. Highly detailed metal construction with many separately applied details. 3-part locomotive superstructure with swing-out front ends. Detailed roof equipment with safety grills underneath the pantographs. Length over the buffers 22.3 cm. Prototype: Class Ce 6/8 II Crocodile electric locomotive, as an SBB Historic museum locomotive. Type from the first construction series. Dark brown basic paint scheme. With sleeve buffers, end transition plates, small shunting steps and handrails, with a wrong-way signal and Signum-Integra magnets. Locomotive road number 14253. Current operating condition. -> EAN 4001883395951

2023-06-30

Faller 130701 - H0-gauge kit Stadthäuserzeile Beethovenstraße

H0-gauge, row of town houses Beethovenstraße. Lively city scene! The town row consisting of 4 buildings with 2 corner and 2 row houses offers many variation and combination possibilities. On the first floor of each house there are stores and business premises. The upper floors are typical old town residential units. The two row houses can also be built in halves. This kit contains: 1068 individual parts in 16 colors, window parts, 4 curtain masks, 4 decos and 4 building instructions. -> EAN 4104090307011

2023-06-25

Fleischmann 9475 - N-gauge kit roundhouse 3 stall

N-gauge, Fits the 9152 railroad turntable. 3 locomotive stalls for 7.5° track outlets, with 8 movable gate wings. Excellently detailed plastic parts. Many individual parts for individual decoration are included. The gates are automatically closed and opened independently of each other by locomotives coming in and out. Several roundhouses can be placed next to each other as desired. There is a gate on the back of the locomotive shed that can be opened for locomotives to drive through. -> EAN 4005575094757

2023-06-24

Fleischmann 9152 - N-gauge Railroad turntable

N-gauge, railroad turntable Bridge length: 18,3 cm Contents: 6x drive-up track, 4x dummy track, 1x turntable switch 9152 C: Comfort turntable with electric drive and electric individually switchable track outlets, with 6910 turntable switch. 183 mm length of the turntable bridge. The turntable is made in prototypical pit design and in prototypical representation of all details. The basic equipment of the turntable consists of 6 drive-up tracks and 4 dummy supports. The drive-up tracks can be rearranged in any number and arrangement at an angle of 7.5° and can be expanded to a total of up to 48 sidings using 9153 turntable extension sets. The thinking turntable: The 6910 switch controls the turntable's rotation to reach the appropriate track feeder. The traction current is fed into the turntable. The desired track feeder, to which the turntable is connected, is switched on electrically with switch 6910. All other track outlets (also one opposite) are then automatically de-energized. Thus, a maximum of 48 track outlets can be controlled and switched on electrically individually without having to lay extra cables. Note: Control your turntable comfortably - with TURN-CONTROL, the electronic turntable control unit (Item No. 6915). -> EAN 4005575091527

2023-06-23

Faller 232258 - N-gauge Kit Schwarzwaldhof

N-gauge, Schwarzwaldhof - Dimensions: 148 x 153 x 90 mm A dream model of a Black Forest farm, which finds its ideal place everywhere in the valleys, meadows and forest landscapes in the layout background. Equipped with many, typical, lovingly designed accessories. This kit contains: 263 individual parts in 8 colors, 1 curtain mask and 1 building instruction. Use FALLER plastic glue for tinkering. -> EAN 4104090322588

2023-06-18

Fleischmann 6476 - H0-gauge roundhouse 3 stalls

H0-gauge roundhouse kit to go with the 6152, 6154, and 665201 (AC) railroad turntables. 3 locomotive stands for 7.5° track exits, with 8 movable gate wings. Excellently detailed plastic parts, very many individual parts for individual decoration are included. The gates are automatically closed and opened independently by locomotives entering and leaving the shed. On the back side of the locomotive shed there is a gate that can be opened for passing through. Ring locomotive sheds can be placed next to each other several times. -> EAN 4005575064767

2023-06-17

Fleischmann 6152 - H0-gauge DC Railroad turntable

H0-gauge, 6152 C: Comfort railroad-turntable for 2-wire direct current with electric drive and track outlets that can be switched individually electrically, with 6910 turntable switch. 310 mm long turntable bridge. The turntable is made in prototypical pit construction and in prototypical representation of all details. The basic equipment of the turntable consists of 6 drive-up tracks and 4 dummy supports. The number and arrangement of the drive-up tracks can be changed as desired at an angle of 7.5° and can be expanded to a total of 48 sidings using 6153 turntable extension sets. The "thinking" turntable: The 6910 switch controls the turntable's rotation to reach the appropriate track feeder. The traction current is fed into the turntable. The desired track feeder, to which the turntable is connected, is switched on electrically with the switch. All other track outlets (also one opposite) are then automatically de-energized. Thus, a maximum of 48 track outlets can be controlled and electrically switched on individually without the need for additional wiring. -> EAN 4005575061520

2023-06-16

Faller 120217 - H0 gauge Electric locomotive shed, 3 stalls

H0-gauge, electric locomotive shed, 3-stand. In open, transparent glass construction, with 3 shelters for locomotives up to 310 mm clearance. The gates can be opened and closed slowly by installing one gate operator each (item 180624, 12-16 V, DC/AC voltage). Mechanical parts are included. Can be used for transfer cars and for all types of track. Catenary operation possible. Can be built several times side by side. This kit includes: 295 parts in 4 colors, window parts, 1 decoration, and 1 set of building instructions. -> EAN 4104090202170

2023-06-11

Revell 67823 1:24 Kit Porsche Junior 108 "Farming Simulator Edition".

1:24 Model Set Porsche Junior 108 "Farming Simulator Edition". The Junior 108 is a true tractor legend of the late 50s and thus comes from a time when Porsche stood not only for sports cars but also for more down-to-earth technology. Fans of the tractor can now not only build it, but also move it virtually together with Farming Simulator (sold separately). The kit includes a code with which the tractor can be downloaded for free and then used in the game. - Movable engine hood - Detailed engine halves - Quick success is guaranteed with this model thanks to the innovative easy-click system: Multi-colored, precisely manufactured components are stably connected by simply plugging them together and decorated with stickers. Scope of delivery: Plastic model kit (not assembled). Illustrated, multilingual building instructions Decals Stickers Base colors and brushes > EAN 4009803678238

2023-06-10

Piko 40254 N-gauge analog rail bus with control trailer "Gleismesszug" DB A

N-gauge analog, rail bus with control trailer "Gleismesszug" of the DB AG, era V. Variant of the diesel railcar in the paint scheme of a DB AG track measuring train in Era V. The PIKO models of the powered rail car and the cab control car embody functionally reliable designs, just like their DB prototypes. The powered rail car model is driven by a miniature motor that is equipped with two precisely dimensioned flywheel masses for perfect running characteristics. The drive acts on both axles of the railcar. Since the powered rail car and cab control car can be coupled to each other via a current-conducting close-coupling kinematic system, two additional (and thus four) axles can be used for safe current pickup during operations with the cab control car. The powered rail car has a PluX16 digital interface according to NEM 658. The lighting functions of both cars can be switched separately. A clear view through the passenger compartments is possible on both the powered rail car and the cab control car. The powered rail car can also be used prototypically as a powered rail car for hauling individual freight cars. Model Details: - Railroad administration: DB AG - Era: V - Dimensional drawing: LüP / length over buffers - Dimension [mm]: 182 - minimum radius [mm]: 192 - Digital interface: NEM 658 PluX16 - (Interior) lighting: Switchable interior lighting factory-equipped - Number of traction tires: 2 - Coupler: NEM shaft + close coupler linkage - Sound: PIKO sound decoder retrofittable #46526 - Light change: Direction-dependent light change white / red > EAN 4015615402541

2023-06-09

Faller 222127 N/1:160 Kit glass-roofed station hall

N-gauge, glass-roofed station hall, the glass-roofed hall can be extended as desired in both length and width. This kit contains: 74 individual parts in 4 colors, window parts and 1 building instruction. - Dimensions: 365 x 220 x 85 mm - Platform width: 40 mm - Parallel track spacing: 89.7 mm > EAN 4104090221270

2023-06-04

Wiking 043852 H0/1:87 Magirus Deutz ESSO

H0/1:87 Magirus Deutz flatbed truck with tank ESSO (special edition). The red Magirus Sirius flatbed truck gets a white add-on tank as heating oil transporter on the flatbed. Doors and tank with Esso logo and lettering. In addition, a silver detail printing on the grill, side Magirus Deutz lettering on the chassis. -> EAN 4006190438520

2023-06-02

Faller 110113 H0-gauge Bonn station with many decoration parts

H0 gauge, Bonn station, many decorative parts that realistically enliven the station picture: Train running indicator, loudspeakers, clocks, wastebaskets, car status indicator boards, benches, timetable boards, illuminated kiosk, luggage lockers, ticket office and various advertising signs. Particularly interesting effects are created by the illumination of the central reception building. In addition, the kiosk and ticket counters can also be illuminated here. The intermediate and corner buildings can also be illuminated. The construction of this large model is greatly simplified by the fact that the 5 building complexes are glued together individually and only then assembled to form the complete model. -> EAN 4104090001131

2023-05-28

Revell 67677 1:24 Kit VW T1 Van "Dr.Oetker"

1:24 scale kit VW T1 box "Dr.Oetker" model set incl. glue, paints and brushes. The VW T1 brand advertising bullis of the food manufacturer Dr. Oetker traveled all over Germany in the 50s and 60s. At many events, the well-trained employees provided housewives with advice, delighting adults and children alike. - Multi-part body - Authentic decals Scope of delivery: - Plastic model kit (not assembled). - Illustrated, multilingual assembly instructions - Decals - Base colors and brushes -> EAN 4009803676777

2023-05-27

Fleischmann 731369 n-gauge Elektrolokomotive Re 460 019, Digital/Sound

N-gauge Sound Electric Locomotive Re 460 019, left and right with different illustrations, 175years Swiss Railways SBB - With elaborate printing in the anniversary design. - Both side walls with different design - With extra attached windscreen wipers - The rear light (1x white) or train closing signal (1x red) can be switched with a DIP switch SBB celebrates 175 years of railroads in Switzerland. On August 9, 1847, scheduled passenger service began between Zurich and Baden, on the Spanish Brötli Railway. This marked the beginning of the development of the Swiss railroad network. This historic moment in Swiss railroad history is being celebrated with a fitting anniversary program. The Association of Public Transport, SBB, Postbus and the Alliance Swiss Pass have designed a variety of public events in five regions for the celebrations, as well as the official ceremony on August 9, 2022. Another highlight drawing attention to the anniversary year is the Re 460 class locomotive designed by FLEISCHMANN in collaboration with SBB and artist Gudrun Geiblinger. The anniversary locomotive has been given two different side designs. On the one hand, the world-famous Spanish Brötli train is reminiscent of the first railroad in Switzerland and the historic Zurich main station exudes the charm of the early railroad era. The other locomotive side has arrived completely in the modern age: The Swiss ICN high-speed train can be seen leaving the Gotthard Base Tunnel, a masterpiece of the Swiss rail industry. -> EAN 4005575258463

2023-05-26

Faller 212123 N-gauge Bahnhof Wittenberg, station of the future

N-gauge, Wittenberg Station, Station of the Future Model of the single-story station building of Lutherstadt Wittenberg with travel center, waiting lounge and service facilities based on the original DB Station&Service AG model. Slate and clinker brick as building materials, large glass surfaces and green roofs characterize the appearance of the "Green Station", which is particularly climate-friendly to operate. This kit contains: 240 individual parts in 8 colors, window film, 1 curtain mask, 1 decoration and 1 building instruction. - Dimensions: 250 x 106 x 60 mm -> EAN 4104090121235

2023-05-21

Revell 00457 1:32 Spitfire Mk.IXc Technic

1:32 Spitfire Mk.IXc Technik The iconic Spitfire now really comes to life as a Technology Kit: fully automated the model runs a realistic start sequence with harmoniously starting engine and switching on the navigation lights. The whole thing is supported by the authentic sound of the Rolls-Royce Merlin engine. -> EAN 9005033720179

2023-05-20

Roco 76005 H0/DC 3-part tank car set EVA

H0-gauge DC, 3-part tank car set of the Eisenbahn-Verkehrsmittel AG (EVA) used on the German Federal Railroad, Era IV. - Finely detailed design with different car numbers -> EAN 9005033760052

2023-05-19

Faller 130915 H0/1:87 Goethestraße, contains four town houses

H0-scale, Goethestraße, contains four town houses The houses of this four-part row of buildings were built around 1929 and have an ornate stucco facade with Art Nouveau. The row of buildings consists of two four- and two three-storey buildings and is variable in its build-up. These buildings can be used to create »boulevards« as well as typical backyard settings in the city or on the railway line. Beautiful boulevard in the front – in the back typical backyard setting. Whoever travels by train in Germany is familiar - along the intra-urban lines - with this picture: the typical backyard setting along the railway lines. Important scenery for model railroaders which should not be missing on any layout. The rear facades are in a brick-and-mortar style as they could be found almost everywhere in Germany. This building kit contains: 940 single parts in 16 colours, window foil, 4 paper masks and 4 construction instructions. Use for handicrafts FALLER - plastic glue. -> EAN 4104090009151

2023-05-14

Lemke Minis 4251 - N/1:160 Liebherr A922 Litronic mobile excavator with bucket

N/1:160, Liebherr A922 Litronic mobile excavator with bucket -> EAN 4250528614258

2023-05-13

Fleischmann 733004 N-gauge DB class 140 era IV electric locomotive

Electric locomotive class 140 of the Deutsche Bundesbahn. Model with single lamps and rain gutter Chassis made of metal die-cast material The headlights can be partially or entirely switched off with a DIP switch The BZA Munich, Kraus-Maffei and the SSW developed the class E 40 to transport heavy goods trains on main lines in the lowlands. The technical design of the class E 40 corresponds mainly to the E 10.1 locomotive. Only the gear ratio was changed and the standard installation of an electric brake was abandoned. Over 800 of the 110 km/h fast machines were put into operation from 1957 onwards. Their power output is 3,260 kW. In 1968 it was renamed class 140. For a long time, it hauled most of the goods trains on electrified lines; however, it was also used in front of passenger trains. At the end of 2016, it was taken out of service by the DB after almost 60 years of operation. This offer is valid until Friday the 19.05.2023 12 clock, or while our stock lasts. -> EAN 4005575195706

2023-05-12

Faller 239001 N-gauge station set Mühlheim

This building kit contains: 233 single parts in 15 colours, 1 paper mask, 2 decorations and 3 construction instructions. Use for handicrafts FALLER - plastic glue. Inhalt: - 1x Bahnhof Mühlheim - 1x Bahnsteig - 1x beschrankter Bahnübergang - Zubehör Maße: - 135 x 78 x 60 mm - 581 x 36 x 37 mm - 143 x 98 x 42 mm -> EAN 4104090390013

2023-05-08

LS Models novelty 16002 in H0-gauge ET 403 of the DB in IC livery, era IVb.

The class ET 403 railcars were built at a time when IC trains were still running purely first class. Shortly after they went into service, the railroad decided to use the more economically viable two-class IC system. The three driving car trains migrated to special services, where they were used in various combinations of up to 6 units. Designed by the DB Design Center in Munich, the trains aroused a great deal of fascination right from the start due to their striking shape, and this fascination has not diminished to this day. LS Models offers the train in the well-known high level of detail. The basic sets consist of 4 parts according to the prototype. With the separately available middle cars, the trains can be extended to 6 cars.

2023-05-07

Viessmann 4119 H0-gauge Concrete mast for new construction lines

Concrete mast for new construction lines With beam, filigree metal work. Middle crossarm: 4 cm. Height: 9,85 cm -> EAN 4026602041193

2023-05-06

Roco 72140 H0-gauge steam locomotive 053 129-3 of the DB

Steam locomotive 053 129 of the Deutsche Bundesbahn. Drive on two axles of the tender and via cardan shaft on all five drive axles of the locomotive. Version with tub-style tender, DB emblem on driver’s cab and leading disc wheels Delicately designed model with many extra applied plug-in parts Sets of elaborately designed metal wheels With set of etched signs included Smoke generator retrofittable The class 50, at that time probably the most important DB steam locomotive of the 1950/60s with many design variants, had proven itself in front of almost all types of trains on main and branch lines. After all, more than 60 variants ensured that hardly any class 50 locomotive had an utterly identical appearance to any sister locomotive. The 1'E goods train locomotives, built in about 3,100 units from 1939 onwards, were robust, powerful, easy to maintain, and highly reliable. After 1945, more than 2,000 locomotives remained with the Deutsche Bundesbahn. The locomotives reached a top speed of 80 km/h, had a power output of approximately 1,200 kW and an axle load of 15 tonnes. When the EDP class scheme was introduced in 1968, there were still 1,452 locomotives in the DB's rolling stock. Since the serial number could only have three digits, the designations 051, 052 and 053 were introduced in addition to the class number 050. -> EAN 9005033721404

2023-05-05

Faller 120148 H0-gauge bridges large coal plant complete with high bunker

Prototypical coaling facility complete with concrete blockhouse, two coal conveyors (170 mm each), gantry crane and a bag of »coal« as realistic decor. - Maße: 340 x 274 x 245 mm -> EAN 4104090001483

2023-05-03

LS Models novelty 16005 in H0 gauge ET 403 Lufthansa Airport Express

The ET 403 series express railcars experienced a second heyday when they were leased to Lufthansa, which was trying to make its still unprofitable short-haul flights between Düsseldorf, Cologne and Frankfurt more lucrative. The railcars were in service for Lufthansa until 1993. The excessive cost of the upcoming overhaul put an end to their service. The technical design of the ET403 allowed the multiple units to be configured freely and thus in line with demand. Two- to six-car units could be formed. In addition, the multiple units were also operated in double traction. LS Models has taken into account all the changes made for the conversion to the Lufthansa version in the model. Pre-order possibility, available approx. from October 2023:

2023-04-30

Viessmann 6464 - N-gauge Platform Lamp, 36 mm, 2 LED´s

"N-gauge, platform light, 2 LEDs white", maintenance-free thanks to LED lighting. With patent plug-in base for particularly easy mounting. Height: 3.6 cm -> EAN 4026602064642

2023-04-28

Faller 222596 N-gauge Bridges Viaduct Set Landwasser

That bridge built with dark limestone is located on the railway line from Tiefencastel to Filisur in the Swiss canton of Grisons. The Landwasser viaduct is a 136 metres long and 65 metres high railway bridge of the Rhaetian Railway and considered to be an emblem of the company. - Maße: R: 193 mm, Durchfahrtshöhe: 57 mm -> EAN 4104090225964

2023-04-23

Brawa 5020 Single curved arm light, H0-gauge

Single curved arm light, H0-gauge -> EAN 4012278050201

2023-04-21

Faller 130445 H0-gauge Paradise Bar

Art Niveau building with extensive window ornamentation on the front facade. Various back yard buildings. Advertisements for either a bar or a »House of Sheer Delight« are also included. - Maße: 25 x 183 x 208 mm -> EAN 4104090304454

2023-04-16

Revell 67821 1:24 Kit Deutz D30 Tractor

1:24 Deutz D30 - the classic tractor as a model kit with Easy-Click-System Discover the world of model building now with the Deutz D30 For many it is the most beautiful hobby in the world. Tinkering with models that are true to the original guarantees hours of fun for young and old and the feeling of having created something with one's own hands. Last but not least, it also awakens a healthy dose of pride when the finished model is clearly visible in all its glory on its place of honor on the shelf or sideboard. In addition, crafting promotes spatial thinking, concentration, dexterity and motor skills, as well as an understanding of technology, among other things, especially in children. To facilitate the entry into this fantastic world, there is now the Deutz D30 tractor from Revell with Easy-Click-System and a Geling-Guarantee in 1:24 scale (total length 13.1 cm). Its highlights: - 96 easy-to-assemble individual parts (Easy-Click-System) for beginners and professionals in the original colors of the Deutz D30 from 1961. -stickers for decoration and fine sliding pictures for model building experts -detailed engine halves - so technology becomes tangible -movable engine hood just like the real thing -two rear wheel arch versions to exchange -movable wheels, so that the fun of playing is not neglected either - Base colors and brushes included

2023-04-14

Faller 222105 N-gauge segment turntable with servo 180725

Small revolving plate with a branch-off angle of up to 37.5 degrees ensuring the space saving transfer of railway engines, in the confined space of terminal stations for instance. A thick wood-like plank as well as a powerful micro servo complement these points. 2 track profiles of 94 mm each included. To be connected to Servo Control Art. 180725. - Maße: 96 x 83 x 9 mm - Einbautiefe: 28 mm - Drehwinkel: 37,5° -> EAN 4104090221058

2023-04-08

Herpa 314909 - H0/1:87 Volvo FH Gl. 2020 Schwedencombi DB Schenker

1:87 Volvo FH Gl. 2020 Sweden Combi DB Schenker / Lindas Akeri AB (S) Mould novelty! New long trucks have been on the wish list of many collectors for a long time, now Herpa has implemented a completely new trailer including dolly as well as a roof spoiler adapted to the new box height of the truck. Initially, this Volvo of the current series appears with dolly and two-axle trailer with lettering of the client DB Schenker. EAN 4013150314909

2023-04-07

Roco 70760 H0-gauge DB class 215 022-5 diesel locomotive

Diesel locomotive class 215 of the Deutsche Bundesbahn. Classic Epoch IV locomotive in ocean blue/beige livery Perfectly matches the “Kalkzug”, item 75866 Headlights/tail lights switchable with a DIP switch Model with authentic low wheel flanges Sets of wheels with flanges within 1.2 mm available as spare parts (Items 145433 and 145435) Z21 driver's cab available The class 215 locomotive was first a diesel locomotive of the DB. Later on, the Deutsche Bahn AG used it in the moderate passenger and goods traffic. The series was bought as a variant of the vehicle-family V 160 at short sight and then was equipped with heating steam generators. The main reason for the class 215 production was that class 218, at the time, had not yet reached the production stage. -> EAN 9005033707606

2023-04-06

Faller 130385 H0-gauge hunting lodge Falkeneck

This kit gives the modeller the chance to build a hunter’s lodge into his layout, complete with a wooden drawbridge over a water course or a moat. Dimensions: 188 x 134 x 225 mm -> EAN 4104090003852

2023-04-02

Revell 07516 1:24 Kit Mercedes-Benz 1625 TLF 24/50

1:24 Kit Mercedes-Benz 1625 TLF 24/50 Model: - Multi-part engine - Box body with two detailed cargo compartments - Movable foam/water cannon - Driver's cab with opening doors - Movable wheels - Decals with license plates of different versions (3 x D) - Number of parts: 231 parts - Length: 296 mm - Width: 118 mm - Height: 122 mm Prototype: The tank fire truck (= TLF) based on the Mercedes-Benz 1625 (16 t, 250 hp) and with a 5000 liter extinguishing water tank was originally intended for fighting fires on highways. In the course of its long service with numerous fire departments, however, it proved itself excellently in many other fire operations. Scope of delivery: Plastic model kit (not assembled) Illustrated, multilingual assembly instructions Decals. -> EAN 4009803075167

2023-04-01

Saxonia 180004 N-gauge Set of 2 tank cars ARAL, Ep- IV of DB, aged

N-gauge, set of 2 pieces ARAL tank car, era IV of the DB, elaborately aged. This special series was manufactured by Saxionia exclusively for Modellbahn Kramm. - elaborately aged, operationally dirty, each model is unique. - the cars are aged differently - Basic model from Fleischmann 841402 -> EAN 2000075437853

2023-03-31

Faller 212111 N-gauge Schwarzburg Station

The railway station »Schwarzburg« built around 1900 is the attraction of any model layout. - Maße: 310 x 107 x 120 mm -> EAN 4104090021115

2023-03-26

Kibri 14984 H0/1:87, Unimog with front harvester and dump trailer

H0/1:87, Unimog with front harvester and dump trailer, sweeper Dimensions - 15 x 3 x 4 cm EAN 4026602149844

2023-03-25

Roco 71790 H0-gauge - DR class 120 101-1 diesel locomotive

Electric locomotive class 120 of the Deutsche Bundesbahn. Early Epoch IV version without silencer With set of etched signs included As the Deutsche Reichsbahn (DR) intended to accelerate the traction change in its vehicle fleet, it bought from 1966 to 1975 from the Soviet Union a total of 378 locomotives of the class V 200 (later designated as class 120). Since the locomotives were delivered from factory without train heating, they were mainly used in goods trains. Later, silencers were mounted to reduce the noise level of the motors. Because of the loud motor noise, the locomotive became soon known under the name "Taigatrommel". -> EAN 9005033717902

2023-03-24

Faller 130160 H0-gauge Modern fire station

Be heart and soul. Signal-red fire station similar to the original built in Oberndorf on the Neckar, comprised of a two-storey front building with administrative and social rooms as well as an adjacent hall with four parking spaces for fire engines, and for use as workshop or washing hall. - Maße 208 x 135 x 76 mm, 261 x 135 x 64,5 mm -> EAN 4104090301606

2023-03-17

Fleischmann 718204 N-gauge steam locomotive BR 50 of DB

Steam locomotive class 050 592-5 of the German Federal Railroad, era IV - Version with Witte smoke deflectors - Fine leading wheels with openwork spokes - Free, prototypical view between boiler and running gear - Representation of all fittings, also in the driver's cab - Box tender type 2'2'T26

2023-03-16

Faller 232385 N-gauge town houses Beethovenstraße

An urban scene full of life! That row of four buildings consisting of two corner houses and two terrace houses offers plenty of possible variations and combinations. The ground floor of each building provides space for shops and businesses. The upper storeys house typical urban dwelling units. Both terrace houses can also be built by halves. - Maße Reihenhaus 1: 65 x 58 x 118 mm - Maße Reihenhaus 2: 65 x 58 x 118 mm - Maße Eckhaus 1: 75 x 75 x 123 mm - Maße Eckhaus 2: 75 x 75 x 123 mm - Maße Einfahrt: 32 x 3 x 27 mm (2 x) - Gesamtmaße: 298 x 75 x 123 mm -> EAN 4104090323851

2023-03-12

Brekina 932291 1:87 VW T1 large capacity box rainbow Hilden with city skyline

Dieser Brekina VW T1b Großraumkasten ist ein Exklusivmodell, der zu einer Serie von 8 Modellen gehört. 8 Händler der Händlergruppe W13 haben diese schöne Regenbogen-Serie realisiert. Jeder Händler hat seine eigene Regenbogen Farbe die sich in der Stoßstange und im VW Logo wiederspiegelt. -> EAN 2000075307842

2023-03-11

Roco 67127 H0-gauge - 8 - vers. Freight cars of the German Reichsbahn -

Set of eight different goods wagons of the Deutsche Reichsbahn. The set contains a covered goods wagon with a barrel roof, a covered goods wagon with a flat roof, a refrigerator wagon, three open goods wagons, a stake wagon and a lidded wagon. All models are finely detailed and printed according to the epoch Complete goods train at a convenient price -> EAN 9005033671273

2023-03-10

Faller 130590 H0-gauge gas station 50s.

Small gas station with flat roof based on original models in Friedrichshafen and Tettnang. The ground plan and window band of the cashier´s office as well as the wide-span, slender cantilever roofing the fuel island with two dispensers are rounded off in the classic design of the 50s. The signal red advertising lettering and an all-round contrasting stripe accentuate the white plaster facade. This kit contains: 93 individual parts in 7 colors, window film, 1 curtain mask, 1 decoration and 1 building instruction. - Dimensions 141 x 97 x 53 mm -> EAN 4104090305901

2023-03-07

Piko 71606 N-gauge special model diesel locomotive V 200 102 Rheingold - cream/red.

exclusive model - 1:160, planned production quantity 500 pieces - sum of all variants, delivery is already planned for June/July 2023. Pre-order prices until 31.05.2023 Variants: Piko 71606 - Diesel locomotive V 200 102, Rheingold - cream/red, era III, analog. pre-order price until 31.05.2023 € 119,90 afterwards € 133,00 Piko 71607 - Diesel locomotive V 200 102, Rheingold - cream/red, era III, sound pre-order price until 31.05.2023 € 239,90 afterwards € 255,00 Model: The PIKO model of the cult locomotive V 200.1 for use in front of passenger and freight trains impresses with a successful representation of the brawny front shape, sharp engravings, fine grille and exhaust vent reproductions on the roof, and detailed bogies with many details. Excellent driving characteristics of the contemporary model are provided by a powerful, smooth-running engine that drives all four axles. The V 200.1 from PIKO is a clear, functionally reliable as well as low-maintenance design. The lighting is done with LEDs.

2023-03-03

Faller 222190 N-gauge conveyor Königsgrube

The conveyor system consists of the shaft shed with headgear and the winch house with its own steam energy winch supply. The dumping mechanism on the side of the shaft shed enables the simulation of a railway loading process. - Maße: 174 x 118 x 184 mm -> EAN 4104090021900

2023-03-01

Rivarossi 2809 DB class 55.25 era III steam locomotive

Rivarossi 2809 DB class 55.25 era III steam locomotive Model details: - Mold novelty - With glowing (DC) or flickering (digital operation) firebox - Finely detailed model with digital interface 21-pin (MTC) - Tip / tail lighting red / white, depending on direction of travel - Chassis made of die-cast metal - Coupling according to NEM 362 with close coupling mechanism - Motor with flywheel mass - Length over buffers: 210 mm

2023-02-27

Saxonia 180001 N-gauge, set of 3 RAG self-unloading cars, aged, era IV.

This special series is produced by Saxionia exclusively for Modellbahn Kramm and will be available soon (approx. mid March 23). - Elaborately aged, operationally dirty, each model is unique. - basic model from Jägerndorfer 66305 - the cars are aged differently Self-unloading wagon for salvage transport. The term "Berge" or "Waschberge" is used to describe the rock that is produced during underground coal mining. These mountains were transported at the RAG railroad - port, with FAL wagons in special design. Best regards from Team Modellbahn Kramm

2023-02-24

Faller 120275 H0-gauge Segment turntable with servo (180726).

Small turntable with a branch angle of up to 37.5 degrees for space-saving relocation of locomotives, for example, in cramped terminal stations. The combination of plastic and natural material combines mechanical precision with an appealing look: track planks and the platform for manual operation are made of real wood. Rail sections with a length of 171.5 mm and a powerful servo are included with the turnout. It is connected to the servo control, item 180725, and is also suitable for Märklin center conductors. With a servo (item 180726) and a servo control (item 180725), 2 positions can be controlled. With a digital command station, even 2 x 2 = 4 positions can be controlled. This kit contains: 29 parts in 4 colors, 1 servo and 1 building instruction.

2023-02-13

Revell 05666 kit 1:24 gift set 35 years VW Corrado

Revell kit 1:24 gift set 35 years VW Corrado Model kit of the 1:24 scale VW Corrado is the perfect gift for any VW fan or modeler. With new parts and improved detailing, this kit is sure to impress. The VW Corrado was released in 1988 and only 97535 examples were made. Now you can own your own piece of history with this detailed model kit. With 80 parts, this level 4 advanced model kit is perfect for experienced modelers ages 12 and up. - Multi-part body - Textured interior - Multi-part engine - Glue, paints and brushes included Scope of delivery: Plastic model kit (not assembled) Illustrated multilingual building instructions, decals, poster, base paints (Revell Aqua Color) plus brush and glue (Revell Contacta Professional Mini).

2023-02-12

Bemo H0 novelty in DC and AC immediately available RhB electric locomotive

H0-gauge, RhB Ge 4/4 III 644 world record attempt Alpine Cruise, era VI On Saturday, October 29, 2022, the Rhaetian Railway made an official attempt to run the world's longest passenger train over the UNESCO World Heritage Albula Railway from Preda to Bergün. It worked! With this world record, the RhB and its partners have made their contribution to the 175th anniversary of Swiss Railways and realized a pioneering feat that has never been seen before. Die-cast chassis Five-pole motor Drive and power consumption over all four axles Digital interface Next18 NEM 662 Digital version 1459175/1759175 with LokSound LED headlights dependent on direction of travel LED tail light Brake hoses, heating couplings and handlebars are included for self-assembly Minimum radius: 360mm Vehicle weight: 344 gr. BEMO supported the world record attempt "Alpine Cruise" as a partner and now offers the locomotive model in H0 in DC - direct current and AC - alternating current.

2023-02-10

Brawa H0 Novelty immediately available Diesel BR V160 Era 3 of the DB

H0-gauge DC analog Diesel locomotive class V160 of the DB, era III, road number: V160 067 Model details: -V160 models technically & visually revised -LED lighting -Separate windshield wipers -New prototypical gearbox housing -New with close coupling kinematics according to NEM -Buffer plank & roof more extensively detailed -Improved power consumption -Etched front steps -Cab lighting -New motor -PluX22 interface -D&H sound Prototype: Until the mid-1950s, engine technology did not allow a mainline diesel locomotive to be built with only one power plant and sufficient power. Consequently, the V200 and V200.1 series were created, and these were equipped with two propulsion systems to fulfill their performance program. However, the manufacturers were working flat out on more powerful engines, and by the end of the decade an output of 1400 kW from just one engine was no longer an illusion. As early as 1956, therefore, Krupp began developing a medium-heavy mainline diesel locomotive with one engine, steam heating and a Vmax of 120 km/h. In 1960, Krupp and Henschel delivered a total of ten pre-series locomotives. Nine were given the nickname Lollo because of their appearance, in reference to Gina Lollobrigida. The tenth locomotive already had a sober, much more angular shape that was significantly cheaper to produce and was therefore adopted for series production. The locomotives proved themselves in freight train service and passenger service and, after extensive testing, were built in series from 1964 to 1968. In total, Krupp, Henschel, KHD, Krauss-Maffei and MaK supplied 214 production locomotives. They were used throughout Germany. With the delivery of the BR 218 and the increasing use of electric train heating, they were used more and more in freight service. After the prototype locomotives had been retired by 1984, the series locomotives began to be withdrawn from service in 1993. More and more railcars were used in passenger service, which led to a further displacement of diesel locomotives. As freight traffic declined, the DR brought in the class 232, with which it was possible to replace a double traction unit. By 2004, all 216s had been retired. However, numerous locomotives went to private RUs in Germany and abroad, and in the meantime even some have returned and are in service in approximate original condition. The DB Museum maintains 216 003 in Lübeck and 216 067 in Koblenz, among others.

2023-02-08

ESU DC/AC digital with sound, H0-gauge diesel loco KG230 in different versions

ESU Novelties 2023, just arrived and immediately available Model details: - Metal frame and front ends - Openwork fan grille at the front of the long front end - Finely detailed multicolored driver's cab - Numerous separately applied details on the chassis - Separately applied and partially openwork steps - Freestanding handlebars - Spring buffers - Locomotive engineer figure - Height-adjustable digital shunting coupler for all bow couplers - Bell-type armature motor with flywheel mass - Drive on both axles, one traction tire - LokSound 5 decoder for DCC, Motorola®, M4, and Selectrix® operation - Independent registration to command stations with RailComPlus® functionality - PowerPack storage capacitor for uninterruptible power supply - Loudspeaker with large sound capsule for maximum sound enjoyment - Universal electronics with plug-in wiper and slide switch for switching between two-wire and and center conductor operation - Smoke generator synchronous to the locomotive sound - Digitized original sounds of a KG230 B with 12-cylinder Deutz engine A12 L 714 - Direction-dependent light change, train-side head signal can be switched off, shunting, cab and driver's desk lighting - Brake spark during sharp braking - Chassis lighting - Pipette for filling the smoke generator is included - Two different antennas are included - Length over buffers = 92.3 mm Prototype: In the power class of a Köf III, Deutz offered the two-axle diesel-hydraulic KG 230 B starting in 1962. KG stands for small locomotive with cardan shaft drive, 230 for the power in HP and B for the axle arrangement. The in-house air-cooled twelve-cylinder A12L714 engine produced 230 hp at 2000 rpm. The seven KG 230s built for explosion-sensitive plants carried a water-cooled six-cylinder diesel engine as a deviation. The transmissions of most locomotives were set to a maximum speed of between 20 and 30 km/h in favor of tractive effort. Depending on the track position, the orderers had additional metal placed in the frame area, so that the locomotives could be ordered with a weight of 26 to 36 t. The two locomotives of Bayernhafen AG and the BEHALA locomotives even had multiple control devices. Despite their advanced age, many of the two-axle locomotives still in service today still carry their original engines. Since most of the companies owned only a few locomotives, they were kept in good technical condition, since they could not be dispensed with. The few employees who had been trained on the locomotives knew exactly the limits of their locomotives over the years, and the simple and robust truck technology could often be kept running with the plant's on-board resources. Deutz delivered a total of 64, Henschel another three KG 230 B mainly to German owners, but also to France, Italy, Luxembourg and the Netherlands. One was procured by the German Federal Post Office, and other locomotives in government service were with the Italian state railroad FS and the Spanish RENFE. The list of owners reads like a who's who of major European industry: BASF, RAG, Wintershall, BP, DEA, Shell, VTG, Arbed, Thyssen, Mannesmann, Feldmühle AG, Krupp Stahl, Rheinpreußen, Rhenus, RWE, Ford, MAN, Volkswagen, Kali + Salz, Portland Zement, Holcim Zement, Südzucker AG. Port logistics in Aschaffenburg, Berlin, Braunschweig, Bremerhaven, Ginsheim-Gustavsburg, Hanover, Regensburg and at Luxport in Wasserbillig also relied on the stability and tractive power of the air-cooled two-axle trucks. The high quality of the design is demonstrated by the fact that the locomotives are not scrapped when there is no demand, but are sold on. In elegant red paint, a locomotive at the 241-A-65 club carefully moves valuable museum vehicles.

2023-01-08

Ree Modeles in H0 and N now also online orderable

... from now on you will find locomotives and cars in H0 and N of the French manufacturer also in our online store. The high quality models in a large model range, which are produced according to the highest standards and with the latest technology are now available to you.

2023-01-01

Piko novelties 2023 in all gauges were announced

Shortly after Christmas Piko announced the novelties for H0 DC/AC and N gauge plus G gauge. A real firework of more than 550 novelties are waiting to be seen by you. We offer all novelties at super low pre-order prices until 01/31/2023. We are happy to accept your pre-orders as of now. We wish you all the best and good health in the new year 2023.

2022-09-10

In-house exhibition 2022 at Modellbahn Kramm

We cordially invite you to our in-house exhibition on Saturday, 17.09.2022 from 9.00 a.m. - 6.00 p.m. in the covered courtyard with many companies. Märklin, Trix and LGB: Hand samples of new products and autumn novelties, exclusive advice from the Märklin - expert. Roco: Digital info day with Z21 model railroad control, fall novelties, free update for your Roco Multimaus. Fleischmann: Digital Info Day with Z21 model railroad control system, new products for the fall, free update for your Multimaus. Lemke: Hand samples of new products and exhibition of many current models from Hobbytrain, Kato, Jägerndorfer, LS Models and Lemke MiNis. Joswood: Exhibition of dioramas and showpieces, first-hand tips and tricks for building laser cut models. Hornby on Tour: novelty show with the latest models from Arnold, Rivarossi, Jouef. Liliput: Exhibition of the novelties and blanks of mold making Faller + Pola: Various dioramas with many details in H0 + N gauge. Herpa: Exhibition of the model novelties, current models Viessmann: Demonstration of the different LED lighting variants + various motion models in action. Kibri + Vollmer: Various detailed show pieces, Vollmer stone art and the Kibri rail tamping express with sound and lighting in operation. Raffle: Take part in our big in-house exhibition raffle. Lots of big and small prizes will be provided by the companies. Just fill out the raffle card and put it in our raffle box. The winners will be notified. And for all bargain hunters: A large amount of special offers in all gauges is waiting for you: locomotives, cars, houses, accessories and more.... also in the model cars, car racetracks and in the RC area, great special prices apply to many items only on this Saturday. For our foodies, there's fresh grilled food for small prices: Locomotive driver's bratwurst: "pig's whistle Heizer's pork steak: "coal shovel". Tender water: beer, coke, fanta or water

2022-09-07

IGM Kaarst Club with its 6 meter H0 harbor layout with us in the covered courtyard.

We are looking forward to the 9th and 10th of September 2022. On these days the IGM Kaarst Club will present its 6 meter harbor layout in H0 at our covered courtyard. On Friday the 09th and on Saturday the 10th of September 2022 the IGM Kaarst Club will visit us and show the impressive harbour layout in action. Take your time on one or both days to view the technical details and landscaping at your leisure. On both days the builders will be available to answer your questions. We are looking forward to your visit, the team of IGM Kaarst and Modellbahn Kramm

2022-05-21

Brawa H0 steam locomotive BR-01 now delivered

H0-gauge DC digital with sound, DB class 01 steam locomotive, era III. Prototype: Before the class BR 01 gained its reputation as the German express locomotive, the Borsig (01 001-008) and AEG (01 009-010) companies delivered a total of ten pre-production locomotives to the Deutsche Reichsbahn Gesellschaft (DRG). The first of these was 01 008, which is still in existence today and was handed over to the DRG on January 10, 1926. Model Details: - Large-scale production model of the pre-production series 01 for the first time. - Differences typical of the class 01 series implemented - Modified frame front shoe - Pre-series with longer driver's cab - Boiler, cab and tender as finely detailed plastic components - Openworked ingot frame and spoke wheels made of zinc die casting - Smoke generator and sound decoder installed or prepared for installation - Driver's cab illuminated - Lighting appropriate for the era - Standard shaft at the rear guided by a guide rail - Close coupling between locomotive and tender - True to original reproduction of the standing boiler rear wall - Finest printing and painting - Lines and attached parts with thin walls - Individually applied steps and stairs - Drive in the tender for optimum running characteristics - Single axle bearing in metal - True to scale wheelbase - Filigree metal driving and coupling rods - Fire flickering - Engine lighting - Control carrier in welded design - Tender 2'2' T34 design However, the locomotives were still ahead of their time at that time, because many lines and also depots were not yet prepared for an axle load of 20 tons. As a result, the routes on which the locomotives could be used were still very limited in the first few years of operation. As a result, testing of the new locomotives took a long time. The most striking difference between the first ten 01s and the later series-produced locomotives was the visibly longer cab. There were also differences in the design of the frame and many other details.

2022-03-11

Fleischmann Spur N 731299 special locomotive Re 460 for the anniversary 175 years of Swiss Railways.

The ceremonial rollout took place on 03/09/2022 in Yverdon-les-Bains/Switzerland. A big anniversary is coming up this year in Switzerland. 175 years ago, on August 9, 1847, the first railroad ran between Zurich and Baden on the so-called Spanish Brötli Railway. It all started with the Spanish Brötli - a delicious pastry made in the Swiss spa town of Baden. Of course, this is not quite true, but on August 9, 1847, the first railroad built in Switzerland started its scheduled service from Zurich to Baden. Now the servants of Zurich's fine society could comfortably pick up the famous pastries arriving by train early in the morning and deliver them punctually to the Sunday breakfast table without having to make an hour-long hike to Baden and back. This is why this route soon came to be known as the Spanish-Brötli-Bahn. In the years that followed, a rail construction boom broke out in Switzerland as well, reaching a line length of 2,457 km within 35 years. Finally, between 1902 and 1909, the nationalization of five major railroad companies created the Swiss Federal Railways (SBB). As a result, an increasingly dense rail network wove its way across Switzerland, which is still used extensively today. After all, the Swiss have an absolute record for rail usage, with each person traveling an average of about 1,800 km by train per year. To mark this memorable anniversary, SBB is presenting an electric locomotive with an appropriately eye-catching special design. The locomotive selected for this purpose is the Re 460 019, which has various motifs from Swiss railroad history on the left and right. Best regards Klaus W. Kramm

2022-03-11

Trix H0 25875 DC Sound special locomotive Re 420 for the anniversary 175 years of Swiss Railways.

The ceremonial rollout took place on 03/09/2022 in Yverdon-les-Bains/Switzerland. A big anniversary is coming up this year in Switzerland. 175 years ago, on August 9, 1847, the first railroad ran between Zurich and Baden on the so-called Spanish Brötli Railway. It all started with the Spanish Brötli - a delicious pastry made in the Swiss spa town of Baden. Of course, this is not quite true, but on August 9, 1847, the first railroad built in Switzerland started its scheduled service from Zurich to Baden. Now the servants of Zurich's fine society could comfortably pick up the famous pastries arriving by train early in the morning and deliver them punctually to the Sunday breakfast table without having to make an hour-long hike to Baden and back. This is why this route soon came to be known as the Spanish-Brötli-Bahn. In the years that followed, a rail construction boom broke out in Switzerland as well, reaching a line length of 2,457 km within 35 years. Finally, between 1902 and 1909, the nationalization of five major railroad companies created the Swiss Federal Railways (SBB). As a result, an increasingly dense rail network wove its way across Switzerland, which is still used extensively today. After all, the Swiss have an absolute record for rail usage, with each person traveling an average of about 1,800 km by train per year. To mark this memorable anniversary, SBB is presenting an electric locomotive with an appropriately eye-catching special design. The locomotive selected for this purpose is the Re 420 251, which has various motifs from Swiss railroad history on the left and right. Best regards Klaus W. Kramm

2022-03-11

Roco H0 DC 70677, 70678 special locomotive Re 420 for the anniversary 175 years of Swiss Railways.

The ceremonial rollout took place on 03/09/2022 in Yverdon-les-Bains/Switzerland. A big anniversary is coming up this year in Switzerland. 175 years ago, on August 9, 1847, the first railroad ran between Zurich and Baden on the so-called Spanish Brötli Railway. It all started with the Spanish Brötli - a delicious pastry made in the Swiss spa town of Baden. Of course, this is not quite true, but on August 9, 1847, the first railroad built in Switzerland started its scheduled service from Zurich to Baden. Now the servants of Zurich's fine society could comfortably pick up the famous pastries arriving by train early in the morning and deliver them punctually to the Sunday breakfast table without having to make an hour-long hike to Baden and back. This is why this route soon came to be known as the Spanish-Brötli-Bahn. In the years that followed, a rail construction boom broke out in Switzerland as well, reaching a line length of 2,457 km within 35 years. Finally, between 1902 and 1909, the nationalization of five major railroad companies created the Swiss Federal Railways (SBB). As a result, an increasingly dense rail network wove its way across Switzerland, which is still used extensively today. After all, the Swiss have an absolute record for rail usage, with each person traveling an average of about 1,800 km by train per year. To mark this memorable anniversary, SBB is presenting an electric locomotive with an appropriately eye-catching special design. The locomotive selected for this purpose is the Re 460 019, which has various motifs from Swiss railroad history on the left and right. Best regards Klaus W. Kramm

2022-02-11

New DB advertising locomotives in N Gauge from Piko

Unfortunately, the production of the N-gauge models for "50 Years Intercity" was cancelled by Märklin/Trix. The models Trix 16089.001 and Trix 16089.002 will not be realized. Fortunately, w13 was able to win over the manufacturer Piko, who is now producing the models in N scale. Delivery is planned for November 2022. "50 Years Intercity" in N Gauge as a w13plus exclusive model from Piko. The planned production quantity is 500 pieces - sum of all variants per print. Piko has this year the BR 101 as a mold novelty in the program. Thus, in cooperation with Piko, the 101 110-5 and also immediately the 101 013-0 IC are implemented. The models are also cheaper. Take advantage of our low pre-order prices of the new locomotive from Piko until 31.03.2022 and thus secure your DB anniversary model 50-year IC of the BR-101. 50 Years Intercity 2-color locomotive in the variants: Piko 71604 - Electric locomotive 101 110-5, DBAG, 50 Years Intercity, Era VI, analog. Piko 71605 - Electric loco 101 110-5, DBAG, 50 years Intercity, era VI, sound White IC locomotive in the variants: Piko 71602 - Electric loco 101 013-1, DBAG, IC, era VI, analogue Piko 71603 - Electric loco 101 013-1, DBAG, IC, era VI, sound Best regards the team of Modellbahn Kramm

2021-10-29

H0 sound electric locomotive 101 110-5 Ep.VI of the DBAG locomotive for the anniversary 50 years Int

H0-gauge digital with sound, electric loco 101 110-5 era VI of the DBAG, loco for the anniversary 50 years Intercity A cooperation of the w13 dealer community with the Deutsche Bundesbahn, available from 4th quarter 2022, take advantage of the pre-order price now until 31/01/2022. Highlights: For the first time with drive on all 4 axles Cab lighting Coupling guided by a guide mechanism Digital decoder mfx+ Model: The locomotive has an mfx+ digital decoder and extensive sound functions. Controlled high-efficiency propulsion. 4 axles powered. Traction tyres. The triple headlights and 2 red marker lights change over with the direction of travel, will work in conventional operation, and can be controlled digitally. The headlights can be controlled separately. The cab lighting can be controlled digitally. Headlights on locomotive side 2 and 1 can be switched off digitally separately. If the headlights are switched off on both sides of the locomotive, the double A-light works on both sides. Maintenance-free warm white and red LEDs are used for the lighting. Coupling with guide mechanism. Length over the buffers 21.9 cm. Matching driving trailer for the 50th anniversary of the Intercity with item number 43630.001. This model can be found in DC direct current version in the Trix H0 assortment under item number 25379.001 and for the N-gauge friends in the Minitrix assortment under item number 16089.001.

2021-10-15

Brekina H0/1:87 VW T1 large capacity box rainbow Hilden with city silhouette

This Brekina VW T1b large capacity box is an exclusive model, which belongs to a series of 8 models. 8 dealers of the dealer group W13 have realized this beautiful rainbow series. Each dealer has its own rainbow color which is reflected in the bumper and the VW logo. In addition, under the rainbow is the silhouette of the respective city on the models. A very successful contemporary series. 932289 Aachen rainbow, bumper/logo color red 932290 Nuremberg rainbow, bumpers/logo color light red 932291 Hilden Rainbow, bumper/logo color dark green 932292 Ludwigshafen rainbow, bumper/logo color yellow 932293 Cologne rainbow, bumper/logo color orange 932294 Gütersloh Rainbow, bumper/logo color light green 932295 Dresden rainbow, bumper/logo color blue 932296 Munich rainbow, bumper/logo color dark blue Brekina VW Bus collectors can also order the complete 8-piece set from us at the price of 119,60 EUR (item no. 932291.SET) - delivery time approx. 3-4 weeks.

2021-10-06

Herpa H0/1:87 Car Model Novelties January/February 2022

with the novelties planned for January/February, some new vehicle types expand the "Herpa fleet" in small scale. Among others, the BMW ALPINA B3 now also complements the collection as a Touring. Following the revision of the length regulations for prototype vehicles, the truck segment is being expanded by a new curtainsider trailer, which corresponds to the 15-meter-long original down to the last detail. In addition, the new aerodynamic Ecoflex trailer from Schmitz Cargobull also expands the Herpa range. The range of MAN tractor units is complemented by the narrower cab variants MAN TGS TN and TM at Herpa. In the accessories sector, the new Thermoking Advancer A-400 refrigeration unit will be available from January, as well as the Lowbar and Sidebar accessories frequently seen on many originals for various tractor units.

2021-09-29

Piko H0-gauge electric locomotive class 111 with graffiti, DB-AG, era VI

Prototype: The class 111 has been on the road throughout Germany since the mid-1970s. Over the course of the past decades, its area of operation ranged from long-distance passenger service to use as a commuter train in the Rhine-Ruhr area to its current main activity in local and regional service. Similar to its tasks, the appearance of the four-axle electric locomotive also changed over time. Since the end of the 1990s, it has predominantly been painted in the traffic red livery that is also used on the model. The faithful reproduction in 1:87 scale convinces with the attached handle bars, the filigree windshield wipers and pantographs as well as the interior of the locomotive with many lovingly designed details. The fine paint scheme in combination with the detailed graffiti give this locomotive its special charm and make it a real eye-catcher. For even more closeness to the original, the BR 111 is available in both DC and AC versions with characteristic sound. The locomotive also has digitally switchable train destination indicators, lighting in the cab and engine room, and a white/red light change depending on the direction of travel. The sound versions are factory-equipped with decoders, and the AC version also has mfx capability. Model: - True to the original in 1:87 scale. - Exclusive graffiti - Illuminated train destination display - Digitally controllable lighting - White/red light change depending on direction of travel - Finest painting and printing - Attached handle bars - Lovingly designed details - Engine sounds in analog mode - Two traction tires - Close coupling scenery - Sound versions with typical locomotive noises - length 193 mm Best regards Klaus W. Kramm

2021-09-28

Kibri anniversary model H0-gauge, telescopic crane GOTTWALD GS 100.06 T, kit.

With metal wheels and coupler. Prototype data: Rail-mounted heavy-duty crane for railroad construction. 4 double-axle crabs with 8 wheel sets, 4 of them powered, length 13 m, distance between pivots 8 m, UIC 505-3 clearance gauge, dead weight = working weight 128 t, travel speed in train combination 120 km/h, when traveling on its own 20 km/h, max. load 100 t supported, max. max. load 72.5 t free on rails, working range 0.5 - 15 m in front of buffer (7 - 21.5 m radius), under the overhead line (horizontal) 2.5 - 10 m telescopic, turning range > 360°, diesel engine MAN 2866 with 190 kW/258 hp at 1800 rpm (exhaust gas catalyst), drives fully hydrostatic with stepless electric pilot control. - Driving position: LWP 15 x W 4 x H 5 cm - Extended: Overall length 18.5 x W 8 x H 18 cm Best regards Klaus W. Kramm

2021-09-26

N-gauge Hobbytrain Vectron RheinCargo

N-gauge Hobbytrain novelty digital with sound, class 192 Smartron RheinCargo electric locomotive, Era VI, Model features: - Current consumption over all axles - NEM 662 interface (Next 18) - Alternating light white/red, can be switched off - Consideration of all design differences in detail - with ZIMO sound - length: 119 mm - recommended for Radius 2 The Siemens Vectron success story continues. With over 1000 units sold, the Vectron is definitely one of the most successful rail vehicles ever built. In the meantime, it can be found all over Europe and the circulations of the European locomotive are getting longer and longer. Thus, Slovakian and Swiss Vectron meet in the heart of the Ruhr area. ÖBB is expanding its route network to Holland and SBB Cargo International has designed the Hollandpiercer especially for traffic to Holland. Almost every day, new variants are added and the Vectron now also feels at home in Serbia and Bulgaria. The Vectron has even made its way to Scandinavia and is in service with DSB and Hectorrail. Best regards Klaus W. Kramm

2021-09-25

Brekina has just announced the October novelties 2021

as mold novelties were announced: Faun LF8 based on the Transporter F24. The second focus in the October 2021 program is the new DAF 66. You already know the models as Volvo with the thick Swedish safety bumpers, now the models are also available with the classic petite chrome bumpers as DAF 66. In full, elaborate decoration! These models are also ready for delivery! We have also significantly increased the selection of kits. Since many models from one series can be combined at BREKINA, these kits are the perfect choice. The series will be continued in the future. Also the kits of the BREKINA fire departments based on the MB Rundhaubers are back: Now with extended content, but at the same price as the first one. Best regards Klaus W. Kramm

2021-08-08

w13 exclusive model H0-gauge Piko electric locomotive BR 139 558-1 RailAdventure

New w13 exclusive model H0-gauge Piko electric locomotive BR 139 558-1 RailAdventure, era 6, delivery is planned for February 2022. w13plus exclusive model - 1:87, planned production quantity 500 pieces - sum of all variants, we realized together with Piko the prototype of the 139 558-1 as H0 model in three technical variants, variants: Piko 71173 - electric locomotive class 139 558-1 RailAdventure, era 6, analogue Piko 71174 - Electric loco class 139 558-1 RailAdventure, era 6, DC sound Piko 71175 - Electric locomotive BR 139 558-1 RailAdventure, era 6, AC sound Prototype: RailAdventure GmbH from Munich is a rail service provider for special tasks. These include test and transfer runs, towing of rolling stock, and workshop test runs, as well as the necessary organization and support for railroad operators. For these tasks, RailAdventure has an extensive and specialized fleet of vehicles. In addition to protection and coupling cars, RailAdventure also owns numerous traction units. Due to the very successful and striking color scheme, the vehicles are well known and also very popular with model railroaders. We will offer this BR 139 558-1 locomotive together with Piko as a special model, delivery is planned for February 2022. Model: The E10/E40 series serves as the basis for our BR 139. This successful PIKO model was first delivered in 2016 and impresses with free-standing grab irons and filigree pantographs in an attractive implementation of the prototype. The modern high-performance buffers, scale rail clearers, and the prototypical design of the fans and roof hoods were taken into account for this molded version. In addition, the digitally switchable cab lighting is installed as standard. The five-pole PIKO motor, which drives all four axles, provides excellent running characteristics with its two large flywheel masses and current collection via eight wheels. To ensure high tractive effort, the compact model has, in addition to the zinc die-cast frame, two traction tires that sit on the inside running axles of both bogies in a diagonal arrangement to each other. The model features all PIKO standards, including a PluX22 interface, white/red light change, and close coupler kinematics.

2021-07-30

Lemke MiNis N-gauge, set of 2 VW Bus T2 THW flood relief - limited!

Dear N-gauge customer! As is well known, our region of North Rhine-Westphalia in particular has been hit very hard by the flood disaster, which has caused an incredible amount of damage and suffering. As a particularly committed N-gauge manufacturer, Lemke MiNis will contribute to providing help and support to the people affected. One of the most popular MiNis car models (scale 1:160/N-gauge) from the extensive N range was the VW T2 Bus. Based on the original model, Lemke MiNis are offering this as a one-off double set for €20.00 for the purpose of flood relief. All proceeds from the sale will go to the German Children's Fund / Flood Relief. https://www.dkhw.de/spenden/spendenprojekte/fluthilfe-2021/ Just after a time full of hardship due to the Corona pandemic, the lives of children and young people in the flood region are changing once again in a dramatic way. dramatic way. Children and young people have lost important living spaces: their own room, the nearby playground, the recreational facility. All important anchor points in their lives. Therefore, Lemke Collection GmbH has decided to support the German Children's Fund www.dkhw.de. One-time edition of 400 pieces. Order deadline is 20.08.21. Delivery will take place after publication in October 2021. We thank you very much for your active support!

2021-07-23

Minitrix exclusive model, electric locomotive BR 120 313-2 IC livery DBAG Ep.VI,

Minitrix exclusive model, N-gauge analogue or digital with sound, electric locomotive class 120 313-2 IC paint scheme DBAG Ep.VI, The class 120 was the first three-phase locomotive in mainline service and at the same time the technical basis for the later ICE power cars. The 120 was first handed over to the Deutsche Bundesbahn in 1979 and had its last run on 05.07.2020 as IC 2161 from Stuttgart to Munich. Unfortunately, the 120 never existed in the classic IC colour scheme (white with red stripes). We are taking up exactly this idea and exclusively presenting the 120 313-2 in IC livery. In cooperation with DBAG, we were able to adapt the design of the BR 120 in IC design to the official DBAG specifications. Many thanks for the cooperation and the information. So we can now rightly claim "This is how the 120 would really have been on the road in the original". Overview of the design locomotive BR 120 IC: Roof fronts white red stripe not continuous, but interrupted at the corners red stripe in the front area lowered All DB logos have been adjusted in size and position, as well as the distances between the red stripe and the DB logos. Minitrix exclusive model - N-gauge/1:160, planned production quantity 500 pieces (sum of all variants) Variants: Minitrix 16027.001 analogue electric locomotive 120 313-2 IC livery, DBAG, Ep.VI, Minitrix 16027.002 digital with sound electric loco 120 313-2 IC-painting, DBAG, Ep.VI, We are looking forward to your pre-order.

2021-07-19

Piko N-gauge export models, car set consisting of three SBB type Slmmnps heavy freight cars

All of the cars are loaded with a Swiss Army tank 68. The PIKO N model represents the first N model of the Swiss heavy-duty car Slmmps ever and corresponds in shape, color scheme and printing to the prototype, which has been varied several times. Completely new design with excellent rolling characteristics, finely engraved bogies, close coupling kinematics, removable and adjustable wedges. The handles can be pulled in and out. Limited export edition for Switzerland, now also available from us. our house price 189,00 €, immediately available from stock.

2021-07-16

Piko Benefit Wagon H0-gauge Covered Freight Car Storm Disaster 2021 !!!

Unfortunately, the edition of this car is sold out and can no longer be ordered/delivered. Special model 2021: Benefit car - print version of the DB AG design boxcar in Era VI. All sales proceeds will be donated 100% by Piko to the victims of the severe weather disaster in Nordrhein-Westfalen and Rheinland-Pfalz. This is a great cause we are happy to support, join in and pre-order your benefit car from us now. This Piko H0 car does 2x good, once as an eye-catcher on your layout and once as a donation help for the storm victims of Nordrhein-Westfalen and Rheinland-Pfalz. The delivery of the car will take place after production - probably by the end of September.

2021-07-13

Kato novelty N-gauge multiple unit Class 800/0 GWR, 5 pieces, era VI

Model Details: - detailed version / scale 1:148 - smallest radius: 282 mm - light change white / red - interface for Zimo / Kato K10950D1 - 5-pole motor with flywheel masses - Prepared for interior lighting K11213 / K11214 - Capable of double traction The British Class 800 high-speed trains built by Hitachi have been in service with Great Western Railway (GWR) and London North Eastern Railway (LNER) since 2017. The trains are used as 5-car and 9-car units. The former also in double traction. The trains, designated as Azuma, are equipped with the latest hybrid technology and can operate both under contact wire and on non-electrified lines. The detailed N scale model from Kato comes in 1:148 scale and features white/red light change and an interface for Zimo decoders. Kato MSRP 249,90 € our house price 224,90 €, you save 25,- € (= 10 %) immediately available from stock.

2021-07-12

Novelty just delivered, Schuco Classic Micro Racer VW T1 Post.

First introduced in 1954, the Schuco Micro Racers are now once again an integral part of the Schuco Classic range. Due to their massive and extremely solid metal construction, the Schuco Micro Racers still exude the irresistible charm of the classic, mechanical toys of our youth. The equipment of a Micro Racer includes a particularly fast and long-running spring mechanism, the so-called micro-screw via which the steering is adjusted with millimeter precision for target driving and a shift lever via which the spring mechanism can be stopped and the freewheel set in motion. In order to keep the Schuco Micro Racer series attractive for our collectors in the future, the series is gradually being supplemented with new model developments. Thus, the VW T1 "Bulli" panel van now also complements the Schuco range as a Micro Racer. The Micro Racer VW T1 panel van is in no way inferior to the classic Micro Racers in terms of quality and function. The model is delivered together with a nostalgic cardboard packaging in the style of the Micro Racer packaging of the 50s. Like all Micro Racers, the "new" VW T1 panel van is also realized in the design of the German Federal Post Office in an approximate scale of 1:40. our house price 39,95 €, immediately available from stock.

2021-07-07

w13plus Exclusive Model - Design Changes - Piko BR 120 IC

Design change: Together with DBAG we could adapt the design of our BR 120 in IC design to the official DBAG specifications. At this point many thanks for the cooperation and the information. Thus, we can now rightfully claim "This is how the 120 would have really been on the road in the original". Overview of the most important changes: Roof fronts white red stripe not continuous, but interrupted at the corners red stripe in the front area lowered all DB logos adjusted in size and position, as well as the distances of the red stripe to the DB logos W13plus exclusive model - 1:87, planned production quantity 500 pieces (sum of all variants) Variants: Piko 71152 - Electric loco 120 313-2 IC paint scheme, DBAG, Ep.VI, analogue Piko 71153 - Electric loco 120 313-2 IC-painting, DBAG, Ep.VI, DC sound Piko 71154 - Electric locomotive 120 313-2 IC paint scheme, DBAG, Ep.VI, AC sound Available from November 2021

2021-06-14

Kato N-gauge, Re 620 blue/red Ep5/6 SBB Cargo with aircondition

The six-axle locomotives of the class Re 6/6, currently designated as RE 620, have been used for years by SBB in passenger and freight service. In the meantime, the locomotives have been modified, which is evident, among other things, from the side flap for new aircondition systems. The SBB Cargo locomotives wear the typical Cargo design. Model features: - new filigree pantographs - side flaps for the aircondition - handle bars at the front - 5-pole motor with 2 flywheels - power consumption over 4 axles - lighting with changing direction of travel - prepared for Zimo digital exchange board with buffer memory Best regards, Klaus W. Kramm

2021-06-12

Roco z21 start basic digital set, suitable for H0 and N-gauge

z21 is a modular system: - Start with z21 start command station and Z21 multiMAUS. - Upgrade with WLAN router and activation code, item no. 10814, thus use of smartphone, tablet PC, Z21 WLANMAUS and computer (software-supported model railroad control) possible. - If you have your own WLAN router and you are familiar with WLAN networks, then the activation code 10818 is sufficient for the above mentioned upgrade. Contents: - 1 z21 start digital command station - 1 Z21 multiMAUS - 1 power supply Best regards, Klaus W. Kramm

2021-06-11

Herpa has just announced the September/October novelties 2021

announced as molded novelties were: Mercedes-Benz Arocs Classic 6x4 with loading crane Allrounder semitrailer tractor in municipal orange, Mercedes-Benz Arocs Classic solo tractor unit, MAN TGS NN concrete mixer truck 4-axle in municipal orange, also this year's Christmas models were announced. Best regards Klaus W. Kramm

2021-06-09

Solido 1:18, Fiat 131 Abarth year of construction 1980 in red

The Fiat was produced in high Solido quality and has the following equipment: true to original interior steerable front wheels opening doors Best regards, Klaus W. Kramm

2021-06-07

Roco H0 DC digital with sound, DB AG class 335 160-8 diesel locomotive, era VI

Novelty 2021 just delivered - With digital shunting coupler for more playing fun - Die-cast zinc motor front end and transmission block, therefore more dead weight and high tractive effort - Finely detailed design with many plug-in parts and free-standing grab irons - Prototypical light and sound functions can be switched by means of an onboard decoder - Clear view through the reproduced driver's cab - With buffer capacitor for uninterruptible power supply Best regards, Klaus W. Kramm

2021-05-31

.. dear customers, finally the time has come,

we are open again without restrictions ... only with mask and distance you can again schoppen with us, we look forward to a wiedersehn with you. You may visit us again without an appointment. Also without Corona test. Access is only allowed with FFP2 or OP mask and keeping the minimum distance. Of course you can still order in our online store www.modellbahn-kramm.com around the clock and we will deliver your order by DHL to your home, (within Germany) from 60 € invoice value even postage free. Best regards from the entire Team Modellbahn Kramm

2021-05-29

Wiking just presented the summer novelties 2021 for June,

great novelties in 3 scales, H0/1:87 and N/1:160 plus 2 nice articles for our lovers of large models in 1:32. All novelties are scheduled for delivery in June 2021, we are happy to accept your pre-order now. Best regards Klaus W. Kramm

2021-05-27

Brekina just announced the summer novelties 2021 for June,

interesting new releases and reissues await, a 1954 Opel Kapitän in various color combinations, the DAF 66 in fashionable contemporary colors in TD trim in full chrome jewelry, and the Bedford TK mid-size truck from the UK. Plus many more model novelties. Best regards Klaus W. Kramm

2021-05-07

Piko exclusive model - H0/1:87 Diesel locomotive 247 501-0, DBAG, railroad construction group, Ep.VI

Planned production quantity 500 units - sum of all variants, delivery in November 2021. The DB Bahnbau Group has been a full-service provider for rail infrastructure for 10 years and is part of DBAG. It was formed in 2010 through the merger of the companies DB Bahnbau GmbH, Deutsche Gleis- und Tiefbau GmbH, Deutsche Bahn Gleisbau GmbH and Ibb - Ingenieur-, - Brücken- und Tiefbau GmbH. The striking service vehicles in the typical yellow-gray color scheme belong on every modern model railroad layout. With the diesel Vectron BR 247 and the matching rail cleaning car (72212) we offer you exclusive, visually interesting and also functional H0 models of the latest Piko generation. Variants: Piko 71155 - Diesel locomotive 247 501-0, DBAG, railroad construction group, Ep.VI Piko 71156 - Diesel locomotive 247 501-0, DBAG, railroad construction group, Ep.VI, DC sound Piko 71157 - Diesel locomotive 247 501-0, DBAG, railroad construction group, Ep.VI, AC sound Matching: Piko 72212 - Rail cleaning car with function, DBAG, railroad construction group, Ep.VI Model: With the Vectron, PIKO delivers a high-precision manufactured model that has numerous extras based on a solid zinc die-cast frame and equipment with proven PIKO standards. The proven PIKO motor provides excellent running characteristics with two large flywheel masses. The tractive effort of the locomotive, which is driven over all four axles, is reinforced by two traction tires, which are located on the inside running axles of both bogies in a diagonal arrangement to each other. The front and rear lamps are illuminated by LEDs whose red and white colors change with the direction of travel. The outwardly elegant appearance of this model includes an accurately reproduced technical "roofscape" and carefully detailed bogies with prototypical wheel disc profiles. The different lengths for the diesel version compared to the electric version, was also taken into account in the model. The two sound variants 71156 and 71157 are already equipped with an XP 5.1 sound decoder.

2021-04-16

New w13 special model from Piko: BR-120 in IC color

H0-gauge New Piko special model, electric locomotive BR 120 313-2 in IC paint scheme Ep.VI of the DBAG. The BR 120 was the first three-phase locomotive in mainline service and at the same time the technical basis of the later ICE power cars. The 120 was first handed over to the Deutsche Bundesbahn in 1979 and had its last run on 05.07.2020 as IC 2161 from Stuttgart to Munich. Unfortunately, the 120 never existed in the classic IC color scheme (white with red stripes). Exactly this idea we take up and bring exclusively the 120 313-2 in IC color scheme. W13plus exclusive model - 1:87, planned production quantity 500 pieces (sum of all variants). Variants: Piko 71152 - Electric loco 120 313-2 IC paint scheme, DBAG, Ep.VI, analogue Piko 71153 - Electric loco 120 313-2 IC-painting, DBAG, Ep.VI, DC sound Piko 71154 - Electric locomotive 120 313-2 IC paint scheme, DBAG, Ep.VI, AC sound Model: The class 120 from Piko is an absolute success model and was delivered for the first time in 2019. The model impresses with the finest paint scheme and printing, applied grab irons, sharply engraved bogie covers, and filigree metal pantographs. The light change is white/red depending on the direction of travel by means of LEDs. The standard cab lighting and the direction-dependent tail lights can be controlled digitally with a PluX22 decoder. The heavy model with two traction tires for high tractive effort has a digital interface PluX22 according to NEM 658 and is prepared for easy retrofitting with sound and the largest possible loudspeaker. Best regards Klaus W. Kramm

2021-04-13

Revell novelty in 1:144 "Das Boot" Collector's Edition.

No film depicts the madness of submarine warfare as vividly and authentically as Das Boot. This collector's edition commemorating the 40th anniversary of the film includes a model kit of U 96 and a replica of the 1981 movie poster. - Two-piece hull - Periscopes retracted/extended - Display stand In addition to base paints, glue and brushes are also included. Additionally, with this anniversary set you will receive a reprint of the 1981 movie poster. Scope of delivery: Plastic model kit (not assembled) Illustrated, multilingual building instructions, decals, paints (Revell Aqua Color), glue (Revell Contacta Professional Mini), with brush and movie poster as a poster.

2021-03-27

Rietze H0 Novelty "Fire Department Düsseldorf

Rietze H0 Novelty "Fire Department Düsseldorf, just arrived the Regional VW T5 KR Bus Fire Department Düsseldorf Kaiserswerth in dayglow color, an interesting model that should not be missing in any collection. Rietze MSRP 18,90 € our house price 17,00 € you save 10,05 % (= 1,90 €) immediately available from stock while supplies last.

2021-03-24

H0/1:87 Faller novelty carousel coffee cups heather roses.

H0/1:87 Faller novelty carousel coffee cups heather roses. Only for those free from giddiness. Functional model of a coffee cup carousel based on an original model in the former Heide Village of the Heide Park Resort in Soltau. Passengers take their seats on a giant tray in oversized coffee cups that rotate around a central coffee pot. A motor is included in the kit. Dimensions: Ø 172 x 135 mm. Faller MSRP 41,99 € our house price 37,39 €, you save (10,95 %) = 4,60 € immediately available from stock while supplies last Best regards Klaus W. Kramm

2021-03-16

... just announced: Wiking H0 Exclusive Models 2021

Wiking H0/1:87 new exclusive models for 2021 WIKING H0 0371 83 Unimog U 411 with 2 flatbed trailers "Ruhrkohle". It was teams like these that were on the road in the coalfields in the 1960s to guarantee the supply of fuel to boiler houses and households. The Unimog 411 with enclosed Westfalia cab, dressed in the colors of Ruhrkohle, drove the black gold directly to the company yards or to the fuel depots to be "bagged" there. Afterwards it went in the house delivery directly into the cellars. The Unimog from WIKING thus more than lives up to its reputation as a powerful draft horse, after all, it has to haul two trailers weighing many tons to their destination. WIKING H0 0859 56 makeshift tanker (MB L 6600) in azure blue When the mighty Mercedes-Benz Hauber thunders up with its six filled tanks, everyone knew that the groaning diesel had a heavy load to carry. The Mercedes-Benz L6600 represents the dawn of the economic miracle. This time, it is on the road as a team with an open flatbed - six mounted tanks tell of the precious cargo. WIKING has given the classic vehicle a filigree printing that corresponds to the authentic prototypes of those years. In those days, the proud fleet owners had a lot for the radiator grille design. Accordingly, the Hauber shines with rich silver trim. There will be only one strictly limited edition of these models. Edition: only 1,000 pieces! Best regards Klaus W. Kramm

2021-03-10

Faller H0/1:87, porcelain factory Langenbach, novelty just delivered

Faller H0/1:87, porcelain factory Langenbach, novelty just delivered. Historic factory building made of red brick with large factory hall, vent extension and partially covered ramp area. Containers, crates, a cast iron fence and other accessories are included in the kit for decoration. For an enlargement of the factory, several kits of the model can be built behind or next to each other. For a smoking chimney, use the "Smoke Generator Set," item 180690. This kit contains: 403 individual parts in 77 colors, window parts, 1 curtain mask, 1 decoration and 1 set of building instructions, dimensions: 340 x 270 x 275 mm Faller MSRP 56,99 € our house price 50,79 € you save 6,20 € (= 10,88 %), immediately available from stock. Best regards Klaus W. Kramm

2021-03-09

1:87 Fiat Baffo Ferrari Racing Transporter (Set)

1:87 Fiat Baffo Ferrari Racing Transporter (Set) As already announced in Nuremberg 2020, Brekina will bring another Ferrari racing transporter based on the Fiat Baffo at the beginning of 2021, which is equipped with 2 classic Formula 1 cars (Ferrari 156 Sharknose) and an additional body. In addition, the transporter comes with a figure set, which is produced by the company Noch exclusively for Brekina. Besides 4 mechanics in the typical brown overalls of the Ferrari racing team, it includes 2 drivers and a race director (I wonder what his name is?). Brekina is very proud of the extremely detailed figures. The winner's wreath is perfectly colored and even the racing goggles of the second driver are perfectly reproduced. If you haven't bought yet, you should hurry because the production is almost sold out! Best regards Klaus W. Kramm

2021-03-05

Diesellok MaK 650D Osthannoversche Eisenbahnen A.G. 60021, Epoche 3, DC-digital mit Sound

Diesellok MaK 650D Osthannoversche Eisenbahnen A.G. 60021, Epoche 3, DC-digital mit Sound Starting in 1957, the 650 D and the 850 D were added to the MaK type program as a further development of the 600 D and 800 D. The longer chassis and the cabs with sunshades were used from the beginning. From the beginning, the longer chassis and the cabs with sunshields were used. Between 1958 and 1965, 21 of the 650 hp four-coupled locomotives were built, with KBE (now HGK) being the largest buyer with 8 units. Today, some locomotives are still present and in service with German private and museum railroads. Model features: - H0 / AC sound - 5-pole motor - Current consumption over all axles - Interface NEM652 - alternating light red/white - Consideration of all design differences in detail - prepared for sound (with ESU decoder) - length: 132,5 mm Heljan MSRP 339,90 € our house price 304,99 € you save 34,91 € (= 10,27 %), immediately available from stock, while stocks last Best regards Klaus W. Kramm

2021-03-04

Rietze novelties for spring 2021 have just been announced

Rietze novelties for spring 2021 have just been announced, available from April/May 2021, we will be happy to take your pre-order. In the info list novelties Arpil 2021 you will find all new models. Best regards Klaus W. Kramm

2021-02-18

Piko special series H0/1:87 electric locomotive BR 151 075-9 Railpool, era 6, future with tradition

Piko special series H0/1:87 electric locomotive BR 151 075-9 Railpool, era 6, future with tradition, w13plus exclusive model - 1:87, planned production quantity 500 pieces - sum of all variants. Variants: Piko 71134 - Electric loco BR 151 075-9 Railpool, era 6, future with tradition, analogue Piko 71135 - Class 151 075-9 Railpool electric locomotive, era 6, future with tradition, DC sound Piko 71136 - Electric locomotive BR 151 075-9 Railpool, era 6, future with tradition, AC sound Prototype: In addition to MAED's BR 155 219-9, RAILPOOL has also implemented a locomotive with two faces. Currently, this locomotive is in service for the LDK (Leipziger Dampf KulTour). The resulting specific detail changes from early 2021 will be implemented accordingly in the model. We will offer this locomotive of the BR 151 075-9 together with Piko as a special model. Delivery is planned for July 2021. Model: Exact design of lamps, windows, buffers, roof equipment and housing shape. engine room view finest painting and printing extremely filigree pantographs digitally switchable cab and engine room lighting, as well as starting lamps valid for the versions 71135 and 71136, as well as for the analog version if a suitable decoder (e.g. Piko 56400) has been retrofitted LED taillights that change with the direction of travel powerful five-pole PIKO motor with large flywheel masses digital interface PluX 22 NEM shaft with close coupler linkage sound variants (71135 and 71136) with Piko sound decoder 4.1, multi-protocol (DCC, Motorola, Selectrix, MFX-capable) and RailComPlus, up to 28 switchable functions, 23 mm round speaker for rich sound We will be happy to take your pre-order: Best regards Klaus Kramm

2021-01-12

WIKING presents first insights into the 2021 programme year

WIKING presents first insights into the 2021 programme year, novelties for the 2021 programme year - Volvo & Henschel Volvo F88 and F89 as three-axle trucks with flatbed and box body The two Volvo long-distance trucks, the F88 and its successor F89, have won the hearts of WIKING fans in no time. Numerous authentic prototypes have been realised in recent years. And that this will continue will be ensured by the associated three-axle truck versions in 2021. WIKING is giving the Volvo Youngtimer of both generations a new chassis so that numerous other prototypes and truck-trailer combinations can be miniaturised. Versions with flatbed and tarpaulin are planned, but also with box body. In addition, a version with a high-sided platform can be realised. Henschel-Hauber HS 140 for tractor-trailer combinations It was considered a giant from Kassel: the Henschel HS 140 had a mighty appearance and that was mainly due to its imposing bonnet. With its 6.5 tonne payload, it was the first truck that the machinery and truck manufacturer presented after the war. WIKING thus realised a completely new development after extensive research had preceded it. The same model had already existed in the 1950s in 90-fold miniaturisation, albeit unglazed at the time. In addition, WIKING boss Fritz Peltzer had opted for the smaller HS 100 series in the glazed era. The cab of the new HS 140 has the typical "bulbous" doors. Extensive engravings of rear windows, roof vents, but also the option of a warning light as well as the insertion of the triangular roof sign, which was common at the time, are provided. The radiator grille naturally has the typical Henschel star and is used as a separate part. Already now, many of the vehicles can be prototypically converted. These include, of course, the box and tank trailers, but a short platform with tarpaulin is also possible. Klaus W. Kramm

2020-12-08

... new company: MBR-Model ...

... we have just added a new company to our offer ... It is the Polish company MBR-Model. It produces exclusive model trees and bushes for model landscaping. Convince yourself and just follow the link. Best regards Klaus Kramm

2020-12-05

Busch H0/1:87 41000.118 Mercedes Benz O-3500 Christmas bus 2020

Busch H0/1:87 41000.118 Mercedes Benz O-3500 Christmas bus 2020 here comes the annual w13 christmas bus limited exclusive model of the wild 13 of 300 pieces, printed on both sides differently, at our house price of 24,95 € it is immediately available from stock while stocks last. Best regards Klaus W. Kramm

2020-12-04

Busch car model novelty H0 / 1:87 VW Beetle with oval and split window

Busch car model novelty H0 / 1:87 VW Beetle with oval and split window VW Beetle with split window year of construction 1952 and with oval window year of construction 1955, for over 60 years we know the Beetle on all roads in Hilden and the world, ... and he runs and runs and runs ..., immediately available is the VW Beetle with pretzel window year 1952 in 3 different colors and the VW Beetle with oval window year 1955 also in 3 different colors.

2020-11-29

Busch H0 / 1: 87 1397 swiveling steam crane, rollable without drive

Busch H0 / 1: 87 1397 swiveling steam crane, rollable without drive Kit for a steam crane with a wooden superstructure and chassis, on which the cab can be rotated with the boom around its own axis. The boom with the crane hook is pivoted and connected to the driver's cab via guy ropes that are guided over pulley heads. The steam boiler in the interior can be seen. The chimney is led to the outside through the corrugated iron roof. The roller model without drive is suitable for commercially available H0 rails. Size (with boom in 45 ° position): 125 x 34 mm, height: 95 mm. Busch MSRP € 69.99 our house price € 62.29, available from stock while stocks last

2020-11-23

Faller classic B-924 old town block H0

Faller classic B-924 old town block H0 Collector's highlight! "The model of the old town block pleases with its rich structure. Variations are possible." Comprehensive building set with city wall for building a varied old town scene in the smallest of spaces. First publication: 1965. High-quality packaging in a retro look, including a reprint of the FALLER magazine at the time. Available now

2020-10-31

H0 / 1:87 Heljan 3 NOHAB novelties just delivered

H0 / 1:87 Heljan NOHAB novelties just delivered Diesel locomotive Nohab MY1155 Altmark Rail Diesel locomotive Nohab MY1149 Eichholz Rail Diesel locomotive Nohab MY1151 KANSAS CITY SOUTHERN Design Information about the model: these locomotives are approved for German rail traffic and move construction trains in Germany from A to B ..., ... the locomotives are available in DC and AC in various executions: 1x DC analog, 1x DC with digital sound decoder and 1x AC with digital sound decoder all models have the following model characteristics: - H0 / DC + AC - 5-pole motor - Power consumption across all axes - NEM660 interface - Alternating light red / white - Consideration of all construction differences in detail - prepared for sound or with ESU decoder NOHAB is the name of the European license variant of the American standard locomotive of the F series from EMD, at the time a subsidiary of the GM group. The diesel locomotive was procured by many railway administrations in Eastern and Western Europe in various axle sequences and is still in use today. The round nose ("bulldog nose") at the front of the locomotive with the narrow, laterally sloping windows gave the locomotive its typical appearance. The type designation was based on the licensee Nydqvist och Holm AB / NOHAB in Trollhättan, Sweden. Best regards, Klaus W. Kramm